B01287 Hazmax ESD Boot S5 HRO SRC CI FO E, Class 3
A chemically protective Electro-Static Discharge (ESD) boot with an integral steel toe cap and vulcanized rubber sole for superior slip resistance. Suitable for applications such as pharmaceutical electro-protective areas.
Manufactured from our proprietary Hazmax compound, providing significantly better chemical resistance than PVC or PU materials
Chemically resistant boot certified to EN 13832-3:2018 (footwear protecting against chemicals)
Conforms to EN 943-1 (Chemical protective clothing) and certified to this standard as part of an appropriate Respirex gas-tight suit
Antistatic - Electrical resistance meets the requirements of EN ISO 20345:2011 A (0.1MΩ to 1,000MΩ)
ESD properties meet the requirements of EN 61340-5-1:2016 (0.1MΩ to 100MΩ) and EN 61340-5-1:2007 (0.1MΩ to 35MΩ)
Integral 200 Joule epoxy coated steel toecap and stainless steel penetration resistant mid-sole
Heat resistant sole EN 20345:2011 HRO, 60 seconds at 300°C
Cold insulation to EN ISO 20345:2011 CI
Fuel and oil resistant upper and sole
Vulcanized rubber sole for improved slip resistance - 30% better than a conventional safety boot sole
Durable, cut-resistant vulcanised rubber sole, significantly extends working life, even in harsh terrain
Cleated outsole for maximum grip in wet and oily conditions (SRC)
Energy absorbing tunnel system in heel to EN 20345:2011 E
Ergonomic cushioned insole (removable & machine washable) for greater wearer comfort
Knitted nylon lining
CE marked on the shaft with date and year of manufacture
Machine washable at up to 40°C
Shelf life of over 10 years
CHEMICAL PROTECTIVE FOOTWEAR
EN 13832-3: 2018 A,K,O,P,Q,R,T
EN ISO 20345:2011 S5 HRO SRC CI FO E
Hazmax ESD Boots Sales Sheet.pdf
Hazmax ESD Boots User Instructions.pdf
Respirex™ International are a leading supplier of personal protective solutions, specialising in the design and manufacture of high-performance chemical, particulate and respiratory protective clothing and protective footwear. Including our industry leading chemical protective footwear and our world class dielectric boots and overboots..
EN 20345 - S5Closed heel, Cleated sole, Toe Cap (Shock resistant to 200J), (P) Penetration Resistant Midsole (≥ 1100 N), (E) Heel Energy absorption (≥ 20 Joule), (FO) resistance to hydrocarbons, (A) Anti-Static (between 1x10 5 Ω and 1x10 9 Ω), (WR) Waterproof
EN 20345 SRC - Slip ResistantSlip Resistance Outsole Tested on ceramic tile with sodium lauryl sulphate (a diluted soap solution) & Tested on steel with glycerol
EN 20345 CI - Insulation against coldFor resistance against cold, EN ISO 20345 footwear is tested for 30 minutes at 1-20°C
EN 20345 HRO - Heat resistant outsoleHeat-resistant footwear features an outsole which must be able to resist 300°C for 60 seconds. can be used in close proximity to hot surfaces such as freshly laid tarmac.
EN 61340-4-3 ESD footwearESD Compliant footwear is used to prevent damage to electronic components via an Electrostatic discharge. Used in electronics manufacturing processes to ensure the control of electrostatic levels.
EN 13832-3This is the European safety standard for chemical protective footwear and is divided into three parts. Part 1 deals with terminology and test methods, Part 2 with requirements for limited contact with chemicals and Part 3 with requirements for prolonged contact with chemicals. For certification to EN 13832 Part 3, boots are tested for chemical degradation over a period of 23 hours against a minimum of three chemicals from a list of 15 designated challenge chemicals contained in Part 1. Part 2 is only intended for limited contact with chemicals and is not recommended for people working with, or in proximity to, dangerous or aggressive chemicals.
Share this product:
|35 or 36 or 37 or 38 or 39 or 40 or 41 or 42 or 43 or 44 or 45 or 46 or 47 or 48 or 49 or 50
Once the user has seen at least one product this snippet will be visible.