WHEEL-E Hybrid reel-tester of continuity Wheel-e

STANDARD(S) : IEC 61010-031
USE :
Testing and measuring the continuity of protective conductors and equipotential bonding.
In accordance with standard NF C 15-100, Wheel-e makes it possible to make sure that the resistance measured between all frames and equipotential bonding is below 2 Ohms (1 Ohm for model W2-10H1301235).
Because it is worn at the belt, Wheel-e is particularly suited to inspecting large buildings, industrial facilities and offices

SPECIFICATIONS :
Protection
• 600V~ CAT III
• 300V~ CAT III
• Compliant with EN 61010-1
• IP2X
• Class 2
• Voltage alert
• Replaceable 0.5A fuse
• Double-sleeved 1mm² PVC cable
• Protection inspected by an accredited outside laboratory in France (LCIE)

Measurements
• Automatic polarity inversion (complies with EN 61557-4)
• Measurement range 0.000 to 20.00 (resolution 0.010)
• Intensity 200mA direct current (complies with EN 61557-4)
• Voltage from 4V to 6V (complies with EN 61557-4)
• Supplied with verification certificate
• Precision ±10% ±0.02 from 0.50 to 2.00.
• 2-ohm threshold (compliant with the French practical guide UTE C 15-105) / 1 Ohm for model W2-10H1301235
• Works on electrical installations energized or not.

Supplied complete with belt.
Starting up kit supplied (coiled lead, crocodile clamp, tip and adapter). Cells supplied.
Accessory not supplied : Telescopic rod PERCHTELE

ADVANTAGES :
- Worn at the belt to free the operator's hands
- Integrated reel for unhindered movement in the inspected premises
- Original display system (red or blue depending on the quality of continuity) doubled by an audio signal
- Single button for all functions
- 30m cable length to reach conductors that are very far away from the equipotential reference.

W2-1OH301235 = Hybrid reel-tester of continuity Wheel-e 1 Ohm, Resistance threshold : 1 Ohm
W2-2OH301235 = Hybrid reel-tester of continuity Wheel-e 2 Ohm, Resistance threshold : 2 Ohm