UNITAG Electro-Alert Detector for safe approach of distribution installations

STANDARD(S) : 1000V CAT IV - IP65

USE : UNITAG is a unipolar detector designed to test the presence of phase on insulated or bare LV conductors.
The level of detection is indicated by a LED bargraph and a beeping sound which speed increases as device approaches a live source.
It is commonly used for detecting stray voltage on poles and cross arms, conductor disconnection on overhead insulated LV conductors….
UNITAG will not replace a standard “proving dead” device but is an ideal complement to bipolar LV detector.

SPECIFICATIONS :
• AC system
• AC mains frequency : 50-60 Hz
• Field of use : from 50V up to 1000V
• Detection by direct contact at 50V
• CAT IV 1000V
• IP65
• Temperature : - 15 ° C to +45 ° C
• 2 x LR03 1.5 volt alkaline (AAA)
• Delivered with soft bag suitable for belt fixing

ADVANTAGES :
• Sound and light alert on voltage presence.
• UNITAG 1000V for using on networks.
• Can be used by hands or on insulating stick.
• Indication of detection level.
• Tip length designed for access to LV panel and test point.
• Audible beeping speed proportional to the level of detection.
• Visual indication of level of detection on a bright LED bar graph.
• Automatic self-test when switched on with green LED indication.
• Multi purpose detector : street light, insulating twisted cables, rescue team, fire fighters.

UNITAGHFE = Type of use: Hand-held , Dimensions (mm): 227 x 45 x 37 , Weight (g): 160
UNITAGUFE = Type of use: Hand-held + stick interface , Dimensions (mm): 241 x 67 x 51 , Weight (g): 210
CPUNITAGU = Type of use: Stick universal interface , Dimensions (mm): 241 x 67 x 51 , Weight (g): 50
UNITAGUFX = Type of use: Hand-held + soft shell + Telescopic Stick, Dimensions (mm): , Weight (g): 710