HA-80FL Windsock Assembly, Flanged foot
The HA-80 FL is a reliable wind direction and wind speed indicator for installation on any desired location. The reliable illumination system (if present) is fixed and therefore has no rotating electric parts or slip-rings. Due to its unique design maintenance cost and power consumption are low.
MAST DIAMETER 76,1 mm
MAST LENGHT Standard: 20 cm, 480 cm (or any other lenght on request max 5800mm)
MAST MATERIAL Stainless steel 316L or Galvanised steel
WINDSOCK Colour red/white (ICAO) or orange (FAA), double stitched with reinforced front hem and grommets. The HA windsock sleeves have been proven to withstand wind speeds in excess of 145 km/h (75 knots). The windsock fabrics have been tested for mechanical strength, UV resistance and colour fastness by an independent laboratory.
WINDSOCK SIZES
Ø300 x 1200mm Ø500 x 1500mm
Ø300 x 1500mm Ø500 x 1500mm with push button
Ø300 x 1800mm Ø600 x 2400mm
Ø400 x 2500mm Ø600 x 3000mm
Ø450 x 2450mm Ø18” x 8ft (FAA size 1)
Or any other custom made size
COMPLIANCES
ICAO Annex 14 Volume I and II
FAA AC150/5345-27
UK CAA CAP 168 and CAP 437
EASA ADR
EASA CS-HPT-DSN
NORMAL INTERNAL LIGHTED Type internal lighting: HA-Internal Lighting
Power supply: 90-240VAC or 6,6A
Power consumption internal light: 12 Watt LED
Type obstruction light: HA-OL
Power supply: 90-240VAC or 6,6A
Power consumption obstruction light: 5 Watt LED
Ingress protection: IP65
Ambient Temperature: -40⁰C to +60⁰C
Share this product:
| Windsock assembly options | Unlighted or Internally Lighted |
| Windsock assembly options | Mast: Stainless steel 316L or Mast: Galvanised steel |
| Windsock assembly options | Mast Length: 20 cm or Mast Length: 4800 cm |
| Color | ORR Orange or RWR Red/White |
Once the user has seen at least one product this snippet will be visible.