BIZ7 Hi-Vis Anti-Static Bizflame Pro Coverall
The Hi-Vis Anti-static Bizflame Pro Coverall offers all the benefits of flame resistant fabric with added hi-vis and anti-static protection.
- Protection against radiant, convective and contact heat
- Certified protection against molten metal splash
- Rule pocket
- Quick and easy side access
- Stud adjustable cuffs for a secure fit
- Concealed stud front for easy access
- Twin-stitched seams for extra durability
- Knee pad pockets to facilitate knee pads
- Premium sew on flame resistant reflective tape
- CE-CAT III
- 8 pockets for ample storage
- Radio loops for easy clipping of a radio
- Phone pocket
- Available in sizes up to 4XL
- Retail bag which aids presentation for retail sales
- CE certified
- 40+ UPF rated fabric to block 98% of UV rays
Shell Fabric: Bizflame™ Pro: 99% Cotton, 1% Carbon Fibre, 330g
EN ISO 11612 (A1+A2, B1, C1, E3, F1)
EN ISO 11611 Class 1 (A1+A2)
EN ISO 20471 Class 3
For over 117 years we’ve possessed an unrelenting ambition to produce the world’s most trusted and requested protective wear. Through the decades, we have continuously proven our dedication to quality, producing world beating safety garments, foot protection, hand protection and PPE, while pushing the boundaries in protection technologies. Technologies that make the workplace a safer place.
EN ISO 20471 Hi-Vis Class 3EN ISO 20471 is divided into three classes, the requirement for the area consisting of reflectors and fluorescent materials – that determines which class you need to choose. Minimum areas of visible material in m². Class 3: Reflective Tape = 0.20m², Fluorescent material = 0.80m². Class 2: Reflective Tape = 0.13m², Fluorescent material = 0.50m². Class 1: Reflective Tape = 0.10m², Fluorescent material = 0.14m². The highest class is class 3. There are two ways to attain class 3. Either choose an EN ISO 20471 product that is rated class 3 on its own (e.g. a jacket) or choose two products that together are class 3 certified.
EN ISO 11612 Heat & FlameThis test uses standard methods and conditions to predict the performance of fabric/garments in the event of contact with heat or ﬂames. Speciﬁc testing is listed below: Dimensional change, Limited ﬂame spread (A1+A2), Convective heat (B) - 3 levels, Radiant heat (C) - 4 levels, Molten aluminium splash (D) – 3 levels, Molten iron splash (E) – 3 levels, Contact heat (F) – 3 levels (temperature 250 degrees Celsius)
EN ISO 11611 Welding & AlliedStandard speciﬁes two classes with speciﬁc performance requirements. Class 1: is protection against less hazardous welding techniques and situations causing lower levels of spatter and radiant heat. Class 2: is protection against more hazardous welding techniques and situations causing higher levels of spatter and radiant heat.
EN 1149 Anti-Static (ATEX)This standard specifies PPE Clothing used in explosive environments (i.e. ATEX) where there is a risk that the garments could create sparks (source of ignition), which in turn could ignite explosive materials. Anti-Static garments marked EN 1149-5 are intended to be worn in Atex zones 1, 2, 20, 21 and 22. In oxygen enriched atmospheres or in zone 0, the Anti-Static garments should not be used without first being approved by a qualified Safety Engineer, as wear and tear can affect the protection of the garment and it is crucial that they are worn the correct way in these environments.
Treated FR GarmentsFR treated fabrics are based on cotton, blended with polyester, para-aramid or polyamide. These fabrics get their FR property from the chemical treatment that is applied to the fabric. This chemical treatment is executed in such a way that it fully penetrates the fiber and as such is bonded throughout the entire fabric. As a result of this treatment, the fabric becomes flame retardant and keeps this property during the lifetime of the garment. PROS: very good protection against molten metal, good protection against heat and ARC, relatively cheap, good value for money in dirty environments where expected lifespan is not very long. CONS: wash fastness is typically not very good (pale look after several washes), to achieve similar FR properties as inherent FR the fabrics typically become a bit heavier and therefore tend to be a bit less comfortable.
Share this product:
|Garment Size||S - Small or M - Medium or L - Large or XL - XLarge or XXL - XXLarge or XXXL - 3XLARGE or 4XL - 4XLarge|
Once the user has seen at least one product this snippet will be visible.