89117-15 ELDORADO Artic Grip® Hdry® Boots S3 WR CI HRO HI SRC
UPPER: Pu Hydro Coated Leather 1,8-2,0 mm
LINING: 3D Air circulation 320 gr.
TOE CAP: CTC- Composite Toe Cap
RESISTANCE TO PERFORATION: Textile resistant to 3.0 mm nail – X Method
INSOLE: Dual insulation
SOLE: PU-Rubber VIBRAM- Arctic Grip
STANDARDS: EN ISO 20345:2011 and comply with DGUV 112-191 and ONorm requirements.
Brand: SIXTON PEAK
Product range: POLAR
Sixton Peak® footwear uses superior quality full grain, nubuck and suede leather with breathability, naturalness and water repellency characteristics beyond the usual standards. Tanning done in Italy ensures a careful manufacturing process for our hides in the use of products that respect the environment and the end user. They are therefore ecological and hypoallergenic.
HDRY® A WATERPROOF AND BREATHABLE BARRIER
Thanks to an innovative process of direct lamination of the upper, Sixton Peak® shoes exceed the normal waterproofing and durability standards. The waterproof and breathable membrane perfectly shuts off any potential entry point of the water into the shoe. It leaves no space between the upper and the membrane and does not allow water to penetrate inside the shoe. Therefore, no weight gain for the footwear that dries faster. It uses a hydrophilic type of membrane with very high breathability and sweat dispersion capacity (SATR A TM47:2019 test).
In traditional footwear with a "bootie" system, water can penetrate between the upper and the lining and even if it does not reach the foot, it stagnates, significantly limiting comfort and increasing the weight of the shoe.
In addition, the water condensation increases the feeling of cold and in case of low temperatures it can also freeze. Drying time becomes lengthy and difficult to complete making it difficult to use the shoe for long periods.
HDRY® technology solves these problems. The waterproof membrane is brought into contact with the upper avoiding the risk of water passing, leaving the inner linings intact and the space around the foot dry.
LINIING: 3D Air circulation 320 gr.
Sixton Peak® chooses the best materials. Technologically advanced fibers to ensure the bestBperformance even in the internal parts of the shoe, less visible but more important for the well-being of the foot. These special three-dimensional linings guarantee an unsurpassed breathability index, combined with a high physical resistance.
REMOVABLE INSOLE: DUAL INSULATION
Insole perfect for winter use and for footwear with protection against cold “CI”. It consists of a highly resistant and absorbing felt piece that keeps the foot dry and warm and of an aluminised film to isolate the foot from the ground.
TOE CAP: CTC- COMPOSITE TOE CAP
Toecap made of plastic, incredibly light and resistant to impact of over 200j, very high elastic coefficient, immediately regaining the original shape without entrapping the toes. Perfect thermal isolation. Not detected by metal detector.
MIDSOLE: Textile resistant to 3.0 mm nail – X Method
New non-metallic fabric inserts, reinforced with technical fibers more performing than the usual inserts and resistant to the finest nail as provided for by the next update of EN ISO 22568:2019.
SOLE: PU-RUBBER VIBRAM- ARCTIC GRIP
New polymer blend with an advanced filler system.Engineered for low temperature use.Improved grip on ice or snow.VIBRAM performance, quality and durability. Self-cleaning outsole, designed to all types of ground better.With scaff cap.
Wearing a Sixton Peak® shoe means feeling comfortable, moving freely and safely, ensuring controlled foot support, stable and comfortable movement of muscles and joints. Just the attention to detail, the lengthy accumulated experience, care in sourcing the best raw materials allows us to create safety shoes of the highest quality. Sixton Peak® is the certainty of having chosen the best.
EN 20345 - S3Closed heel, Cleated sole, Toe Cap (Shock resistant to 200J), (P) Penetration Resistant Midsole (≥ 1100 N), (E) Heel Energy absorption (≥ 20 Joule), (FO) resistance to hydrocarbons, (A) Anti-Static (between 1x10 5 Ω and 1x10 9 Ω), (WRU) Water Resistant (> 60 mins - Absorbance < 30%)
EN 20345 SRC - Slip ResistantSlip Resistance Outsole Tested on ceramic tile with sodium lauryl sulphate (a diluted soap solution) & Tested on steel with glycerol
EN 20345 HI - Insulation against heatFor resistance against heat, footwear is tested for 30 minutes at 150°C.
EN 20345 CI - Insulation against coldFor resistance against cold, EN ISO 20345 footwear is tested for 30 minutes at 1-20°C
EN 20345 HRO - Heat resistant outsoleHeat-resistant footwear features an outsole which must be able to resist 300°C for 60 seconds. can be used in close proximity to hot surfaces such as freshly laid tarmac.
EN 20345 WR - WaterproofIntegrated Waterproof Membrane into Footwear makes it Water Resistant which means it can be worn in outdoor environments exposed to sustained wet weather and not leak. Not to be confused with Water Repellent, which is a classification reached by all S3 Boots
Share this product:
|Footwear size||38 or 39 or 40 or 41 or 42 or 43 or 44 or 45 or 46 or 47 or 48|
Once the user has seen at least one product this snippet will be visible.