Premium

81156-17 MONTANA Hdry® Rigger Boot S3 WR CI SRC

DESCRIPTION:

MATERIALS:
UPPER: Greased Nubuk Dakar Leather Hydro 1,8-2,0 mm
LINING: Soft Full Grain Leather Hydro
GenuineWool Polar
TOE CAP: CTC- Composite Toe Cap
RESISTANCE TO PERFORATION: Zero(K) Perforation resistant
INSOLE: Dual insulation
SOLE: PU Dual-Density SRC
STANDARDS: EN ISO 20345:2011 and comply with DGUV 112-191 and ONorm requirements.
Brand: SIXTON PEAK
Product range: ENDURANCE


TECHNOLOGIES:
UPPER: LEATHERS
Sixton Peak® footwear uses superior quality full grain, nubuck and suede leather with breathability, naturalness and water repellency characteristics beyond the usual standards. Tanning done in Italy ensures a careful manufacturing process for our hides in the use of products that respect the environment and the end user. They are therefore ecological and hypoallergenic.

HDRY® A WATERPROOF AND BREATHABLE BARRIER
Thanks to an innovative process of direct lamination of the upper, Sixton Peak® shoes exceed the normal waterproofing and durability standards. The waterproof and breathable membrane perfectly shuts off any potential entry point of the water into the shoe. It leaves no space between the upper and the membrane and does not allow water to penetrate inside the shoe. Therefore, no weight gain for the footwear that dries faster. It uses a hydrophilic type of membrane with very high breathability and sweat dispersion capacity (SATR A TM47:2019 test).
In traditional footwear with a "bootie" system, water can penetrate between the upper and the lining and even if it does not reach the foot, it stagnates, significantly limiting comfort and increasing the weight of the shoe.
In addition, the water condensation increases the feeling of cold and in case of low temperatures it can also freeze. Drying time becomes lengthy and difficult to complete making it difficult to use the shoe for long periods.
HDRY® technology solves these problems. The waterproof membrane is brought into contact with the upper avoiding the risk of water passing, leaving the inner linings intact and the space around the foot dry.

LINIING:

REMOVABLE INSOLE: DUAL INSULATION
Insole perfect for winter use and for footwear with protection against cold “CI”. It consists of a highly resistant and absorbing felt piece that keeps the foot dry and warm and of an aluminised film to isolate the foot from the ground.

TOE CAP: CTC- COMPOSITE TOE CAP
Toecap made of plastic, incredibly light and resistant to impact of over 200j, very high elastic coefficient, immediately regaining the original shape without entrapping the toes. Perfect thermal isolation. Not detected by metal detector.

MIDSOLE: Zero(K) Perforation resistant
Fabric, non-metallic insert. Puncture resistant more than 1100 N with zero perforation and maximum peak of 2000 N. It guarantees protection over the entire surface of the sole of the foot. Extremely flexible and comfortable.

SOLE: PU DUAL-DENSITY SRC
Two-component PU sole with anti-wear scaff cap and high-comfort in-between insole. Outsole with self-cleaning tread pattern, with a formula designed to ensure greater grip. SRC Antislip standard.

131.74 € 131.74 EUR 131.74 €

13,897.40 Lek


  • Footwear size

This combination does not exist.

Add to Cart Buy Now

SIXTON
SIXTON

Wearing a Sixton Peak® shoe means feeling comfortable, moving freely and safely, ensuring controlled foot support, stable and comfortable movement of muscles and joints. Just the attention to detail, the lengthy accumulated experience, care in sourcing the best raw materials allows us to create safety shoes of the highest quality. Sixton Peak® is the certainty of having chosen the best.


EN 20345 - S3
Closed heel, Cleated sole, Toe Cap (Shock resistant to 200J), (P) Penetration Resistant Midsole (≥ 1100 N), (E) Heel Energy absorption (≥ 20 Joule), (FO) resistance to hydrocarbons, (A) Anti-Static (between 1x10 5 Ω and 1x10 9 Ω), (WRU) Water Resistant (> 60 mins - Absorbance < 30%)
Details
EN 20345 SRC - Slip Resistant
Slip Resistance Outsole Tested on ceramic tile with sodium lauryl sulphate (a diluted soap solution) & Tested on steel with glycerol
Details
EN 20345 CI - Insulation against cold
For resistance against cold, EN ISO 20345 footwear is tested for 30 minutes at 1-20°C
Details
EN 20345 WR - Waterproof
Integrated Waterproof Membrane into Footwear makes it Water Resistant which means it can be worn in outdoor environments exposed to sustained wet weather and not leak. Not to be confused with Water Repellent, which is a classification reached by all S3 Boots
Details

Best Value 
Fast Delivery
Quality Consistency

Share this product:
Footwear size 36 or 37 or 38 or 39 or 40 or 41 or 42 or 43 or 44 or 45 or 46 or 47 or 48
This is a preview of the recently viewed products by the user.
Once the user has seen at least one product this snippet will be visible.
Recently viewed Products