81156-17 MONTANA Hdry® Rigger Boot S3 WR CI SRC

DESCRIPTION:

MATERIALS:
UPPER: Greased Nubuk Dakar Leather Hydro 1,8-2,0 mm
LINING: Soft Full Grain Leather Hydro
GenuineWool Polar
TOE CAP: CTC- Composite Toe Cap
RESISTANCE TO PERFORATION: Zero(K) Perforation resistant
INSOLE: Dual insulation
SOLE: PU Dual-Density SRC
STANDARDS: EN ISO 20345:2011 and comply with DGUV 112-191 and ONorm requirements.
Brand: SIXTON PEAK
Product range: ENDURANCE


TECHNOLOGIES:
UPPER: LEATHERS
Sixton Peak® footwear uses superior quality full grain, nubuck and suede leather with breathability, naturalness and water repellency characteristics beyond the usual standards. Tanning done in Italy ensures a careful manufacturing process for our hides in the use of products that respect the environment and the end user. They are therefore ecological and hypoallergenic.

HDRY® A WATERPROOF AND BREATHABLE BARRIER
Thanks to an innovative process of direct lamination of the upper, Sixton Peak® shoes exceed the normal waterproofing and durability standards. The waterproof and breathable membrane perfectly shuts off any potential entry point of the water into the shoe. It leaves no space between the upper and the membrane and does not allow water to penetrate inside the shoe. Therefore, no weight gain for the footwear that dries faster. It uses a hydrophilic type of membrane with very high breathability and sweat dispersion capacity (SATR A TM47:2019 test).
In traditional footwear with a "bootie" system, water can penetrate between the upper and the lining and even if it does not reach the foot, it stagnates, significantly limiting comfort and increasing the weight of the shoe.
In addition, the water condensation increases the feeling of cold and in case of low temperatures it can also freeze. Drying time becomes lengthy and difficult to complete making it difficult to use the shoe for long periods.
HDRY® technology solves these problems. The waterproof membrane is brought into contact with the upper avoiding the risk of water passing, leaving the inner linings intact and the space around the foot dry.

LINIING:

REMOVABLE INSOLE: DUAL INSULATION
Insole perfect for winter use and for footwear with protection against cold “CI”. It consists of a highly resistant and absorbing felt piece that keeps the foot dry and warm and of an aluminised film to isolate the foot from the ground.

TOE CAP: CTC- COMPOSITE TOE CAP
Toecap made of plastic, incredibly light and resistant to impact of over 200j, very high elastic coefficient, immediately regaining the original shape without entrapping the toes. Perfect thermal isolation. Not detected by metal detector.

MIDSOLE: Zero(K) Perforation resistant
Fabric, non-metallic insert. Puncture resistant more than 1100 N with zero perforation and maximum peak of 2000 N. It guarantees protection over the entire surface of the sole of the foot. Extremely flexible and comfortable.

SOLE: PU DUAL-DENSITY SRC
Two-component PU sole with anti-wear scaff cap and high-comfort in-between insole. Outsole with self-cleaning tread pattern, with a formula designed to ensure greater grip. SRC Antislip standard.