Lonic Jacket with protection against molten metals
The Lonic is the perfect protective jacket when working with molten metals. Made from a light and supple but inherently flame-retardant fabric, this jacket offers excellent protection against molten aluminium (D3) and steel (E3). The jacket is lined with reinforced and sloped seams, which significantly increases durability and wear resistance and also reduces the risk of molten metal sticking to the seams. The standing collar and the sleeve narrowing provide extra protection.
Features & design
Exterior
Straight collar
Closure with hidden press studs under flap
2 patched chest pockets with flap closed by concealed press studs
2 inset pockets with flap and press stud closure
Sleeve narrowing by press studs
Fabric
Sio-Flame™ Molten Metal: 54% Lenzing FR - 20% Wool - 20% Polyamide - 5% Aramid + AST; ± 375 g/m²
European Standards
EN ISO 11612 : 2015 / A1 A2 B1 C1 D3 E3 F1
EN ISO 11611 : 2015 / Class 2 - A1 A2
EN 1149-5 : 2008
EN ISO 13688 : 2013
Tested for harmful substances according to Oeko-Tex® Standard 100 (1708040/Centexbel)
SIOEN Apparel
Sioen produces technical apparel for many different markets where people work in circumstances where safety, comfort and protection are major issues. Professional protective clothing — all weather, high visibility, multi norm, food and cold storage 1. SIP Protection — Forestry clothing. 2. Sioen Firefighter clothing. 3. Mullion — Floatation suits and life jackets. 4. Ursuit — Professional drysuits & diving suits. 5. Sioen Ballistics — Stab, slash and bullet proof garments. 6. Baleno — Outdoor leisure wear, hunting and fishing garments.
EN ISO 11612 Heat & Flame
This test uses standard methods and conditions to predict the performance of fabric/garments in the event of contact with heat or flames. Specific testing is listed below: Dimensional change, Limited flame spread (A1+A2), Convective heat (B) - 3 levels, Radiant heat (C) - 4 levels, Molten aluminium splash (D) – 3 levels, Molten iron splash (E) – 3 levels, Contact heat (F) – 3 levels (temperature 250 degrees Celsius)Details
EN ISO 11611 Welding & Allied
Standard specifies two classes with specific performance requirements. Class 1: is protection against less hazardous welding techniques and situations causing lower levels of spatter and radiant heat. Class 2: is protection against more hazardous welding techniques and situations causing higher levels of spatter and radiant heat.Details
EN 1149 Anti-Static (ATEX)
This standard specifies PPE Clothing used in explosive environments (i.e. ATEX) where there is a risk that the garments could create sparks (source of ignition), which in turn could ignite explosive materials. Anti-Static garments marked EN 1149-5 are intended to be worn in Atex zones 1, 2, 20, 21 and 22. In oxygen enriched atmospheres or in zone 0, the Anti-Static garments should not be used without first being approved by a qualified Safety Engineer, as wear and tear can affect the protection of the garment and it is crucial that they are worn the correct way in these environments.Details
Inherent FR Garments
Inherent fabric guarantees lifelong protection for the wearer. The FR properties lie in the molecular structure of the fibres and cannot be washed or worn out. PROS: excellent heat and ARC protection, excellent colour fastness even after numerous washings hence good cost in use performance, typically lighter weight solutions with excellent comfort levels, typically used in less dirty environments where the corporate look is also important. CONS: limited protection against molten metal splash, typically a more expensive fabric than FR treated. The most common FR fibers used in protective clothing are modacrylics and aramidsDetails
Share this product:
| Garment Size | 44 or 46 or 48 or 50 or 52 or 54 or 56 or 58 or 60 or 62 or 64 |
| Color | 141 Red/Navy |
Once the user has seen at least one product this snippet will be visible.