ST70 Kominoshe BizTex Microporous Tipi 3/4/5/6
Kjo kominoshe ofron më shumë forcë mekanike, mbrojtje ndaj lëngjeve dhe grimcave. Ka Polipropilen të petëzuar mikroporoz e të durueshëm që mundëson një barrierë të shkëlqyer ndaj spërkatjeve kimike dhe agjentëve infektues. Forca fizike e pëlhurës dhe fleksibiliteti sigurojnë mbrojtje dhe rehati edhe në ambjentet më të ashpra.
Veçoritë
Mbrojtje ekselente dhe barriere për lengje dhe pjeset e ngurta
Qepje Hermetike me Shirit për mbrojtje të shtuar
Mbyllje me kapak të dyfishte
Fiksohet të gishti madh
Menge elastike për pershtatje me të mire
Kapuç me forme ergonomike për pershtatje të mire
Certifikim CE
CE-CAT III
Ambalazhimi i produktit është i pershatshem për tu reklamuar ne dyqan
Ky produkt shitet tek
Materialet:
Pëlhura Jashtme/Kryesore: BizTex Micro Plus 82g
STANDARTET
EN 14605 Tipi 3B
EN 14605 Tipi 4B
EN ISO 13982 Tipi 5B
EN 13034 Tipi 6B
EN 1073-2
EN 1149-5
EN 14126
PORTWEST
For over 117 years we’ve possessed an unrelenting ambition to produce the world’s most trusted and requested protective wear. Through the decades, we have continuously proven our dedication to quality, producing world beating safety garments, foot protection, hand protection and PPE, while pushing the boundaries in protection technologies. Technologies that make the workplace a safer place.
EN 1149 Anti-Static (ATEX)
This standard specifies PPE Clothing used in explosive environments (i.e. ATEX) where there is a risk that the garments could create sparks (source of ignition), which in turn could ignite explosive materials. Anti-Static garments marked EN 1149-5 are intended to be worn in Atex zones 1, 2, 20, 21 and 22. In oxygen enriched atmospheres or in zone 0, the Anti-Static garments should not be used without first being approved by a qualified Safety Engineer, as wear and tear can affect the protection of the garment and it is crucial that they are worn the correct way in these environments.Details
EN 13034 Liquid Chemicals
Standard for protection of a potential exposure to a light spray, liquid aerosols or low pressure, low volume splashes when complete liquid permeation barrier (at a molecular level) is not required. The following chemical groups/chemicals can be tested: H2SO4 30% (Sulphuric acid), NaOH 10% (Sodium hydroxide also called lye and caustic soda), O-xylene, Butanol. The result is given in scale 1-3 where the maximum value is 3. To pass the test and be able to use the EN 13034 symbol in the CE-marking, at least one chemical shall obtain level 3 for liquid repellency and at least one chemical shall obtain level 2 for resistance to penetration.Details
Share this product:
| Garment Size | M - Medium or L - Large or XL - XLarge or XXL - XXLarge |
| Color | YER Yellow |
Once the user has seen at least one product this snippet will be visible.