S783 Xhup Shiu Multi-Mbrojtje Bizflame
E çertifikuar Sipas EN, ky xhup kryesues i industrisë për rezistencë ndaj flakës është ideal për mjedise me shumë rreziqe. Përshtatshmëria e rehatshme ofron zgjidhje perfekte për veshjen e përditshme në kushte të ftohta, të lagështa dhe të rrezikshme.
Veçoritë
pëlhurë ujeduruese e trajtuar për rezistence ndaj flakes
Xhep i brendshem ne kraharor
Me Shtresë dhe mbushje të plote për të mbajtur ngrohtësine trupit
Menge të rregullueshme Hook & loop
Mbyllje me kapak para
Etiketa e standarteve e jashteme të Krahu për identifikimin e niveleve të mbrojtjes
Antistatike
Qepje Hermetike me Shirit për mbrojtje të shtuar
Ka Shirit reflektues flake durues cilesia e larte
Zinxhire plastik para me dy hapje
4 xhepa për vendosje të sigurte
Xhep i fshehur telefoni
Kapuç që cmontohet
Lak për radio
Ky simbol tregon se zinxhiri është nje dizajn evropian me puller të pozicionuar ne anen e majte të veshjes.
Pelhura Ajrosese mundeson perthithjen e djerses nga trupi duke mbajtur trupin të fresket dhe rehat
Vend për printim për logon e firmes
Bel elastik ne anesore për komfort maksimal
Certifikim CE
CE-CAT III
Materialet:
Pëlhura Jashtme/Kryesore: Bizflame Shiu: 98% Poliestër, 2% Fibra Anti-Statike, Ajrosëse, e Veshur me PU 250g
Materiali Shtrese: 100% Modacrylic Rezistente ndaj Flakës, 150g
Astari: Shtresë 100% Pambuk Flakë-Durues, 170g
STANDARTET
EN ISO 14116 Index 3
EN 1149-5
EN 13034 Tipi PB [6]
EN 343 Klasi 3:1 X
PORTWEST
For over 117 years we’ve possessed an unrelenting ambition to produce the world’s most trusted and requested protective wear. Through the decades, we have continuously proven our dedication to quality, producing world beating safety garments, foot protection, hand protection and PPE, while pushing the boundaries in protection technologies. Technologies that make the workplace a safer place.
EN ISO 14116 Limited Flame Spread
Protective clothing complying with this standard is intended to protect workers against occasional and brief contact with small igniting flames in circumstances where there is no significant flame hazard and without the presence of another type of heat. Three different categories for flame spread, Index 1, 2 and 3. Index 1: garments should not be worn next to the skin. They must be worn over Index 2 or 3 garments. Index 2 or 3 garments can be worn next to the skin.Details
IEC 61482-2 Protective Clothing Thermal Arc Hazards
Standard for protective clothing against the thermal effects of an electric arc event. Two different test methods: Open Arc IEC 61482-1-1 and Box test EN 61482-1-2. OPEN ARC - IEC 61842-1-1 (USA). The first result, ELIM - The maximum incident energy (cal/cm²) the garment can withstand before the wearer would have a 0% probability of a second degree burn. The second result is either: ATPV (Arc Thermal Performance Value, cal/cm²) The maximum incident energy the garment can withstand before the wearer would have 50% probability of a second degree burn or EBT (Energy Break Open Threshold, cal/cm²) The incident energy at which a 50% probability of a breakopen occurs resulting in a second degree burn. Since ELIM indicates an energy value at 0% probability of a second degree burn and ATPV/EBT at 50% probability, the ELIM value is usually lower than ATPV/EBT. Large differences between the ELIM and ATPV/EBT results highlight the importance of wearing several layers of garments to ensure you are properly protected. EN 61482-1-2 (Europe) is evaluated in two classes in the same test: APC1 protects against electric arc of 4kA (arc energy 168 kJ), APC2 protects against electric arc of 7kA (arc energy 320 kJ). Unlike the American standard, there is not a result scale in this garment tests, only two levels where the garment either passes or fails. A garment with one layer of Flame Retardant fabric usually passes APC 1 - even thin shirt fabrics. To pass APC 2, a system with two or three fabric layers or a lined garment is normally required. This makes it more difficult to adapt the protection to the risk, without compromising on comfort. As APC 1 is a relatively low level of protection, we always recommend a basic protection of at least 8 cal/cm².Details
EN 1149 Anti-Static (ATEX)
This standard specifies PPE Clothing used in explosive environments (i.e. ATEX) where there is a risk that the garments could create sparks (source of ignition), which in turn could ignite explosive materials. Anti-Static garments marked EN 1149-5 are intended to be worn in Atex zones 1, 2, 20, 21 and 22. In oxygen enriched atmospheres or in zone 0, the Anti-Static garments should not be used without first being approved by a qualified Safety Engineer, as wear and tear can affect the protection of the garment and it is crucial that they are worn the correct way in these environments.Details
Treated FR Garments
FR treated fabrics are based on cotton, blended with polyester, para-aramid or polyamide. These fabrics get their FR property from the chemical treatment that is applied to the fabric. This chemical treatment is executed in such a way that it fully penetrates the fiber and as such is bonded throughout the entire fabric. As a result of this treatment, the fabric becomes flame retardant and keeps this property during the lifetime of the garment. PROS: very good protection against molten metal, good protection against heat and ARC, relatively cheap, good value for money in dirty environments where expected lifespan is not very long. CONS: wash fastness is typically not very good (pale look after several washes), to achieve similar FR properties as inherent FR the fabrics typically become a bit heavier and therefore tend to be a bit less comfortable.Details
Share this product:
| Garment Size | S - Small or M - Medium or L - Large or XL - XLarge or XXL - XXLarge or XXXL - 3XLARGE or 4XL - 4XLarge or 5XL - 5XLarge or 6XL - 6XLarge |
| Color | NAR Navy |
Once the user has seen at least one product this snippet will be visible.