PS52 Helmetë Full Brim Future
Helmeta Full Brim e lehtë prej materiali PP. Pamja e saj e gjërë mundëson mv shumë mbrojte ndaj rrezeve verbuese, shiut, grimcave dhe spërkatjeve jo-toksike. 4 pika montimi dhe me madhësi të rregullueshme (52-63cm). Përfshihet fasha me shkumë të butë për djersë.
Vecorite
Helmete me strehe te plote e cila mundeson mbrojtje shtese ndaj diellit, shiut, copezave, dhe sperkatjet jo toksike
Skileti i brendshem amortizues me 4 pika kapje ne helmet për rehati dhe siguri të shtuar të përdoruesit
Shirit për kokë me madhësi të rregullueshme me togezen rrotulluese
Shkume e bute dhe shiriti i ballit i perfshire
Deri në 7 vjet jetë nga data e prodhimit (për aq kohë sa i padëmtuar)
Certifikim CE
Materialet: Polipropilin, PE, 465g
STANDARTET
EN 397 (-10°C/+50°C)
ANSI/ISEA Z89.1 Tipi I (Klasi E)
PORTWEST
For over 117 years we’ve possessed an unrelenting ambition to produce the world’s most trusted and requested protective wear. Through the decades, we have continuously proven our dedication to quality, producing world beating safety garments, foot protection, hand protection and PPE, while pushing the boundaries in protection technologies. Technologies that make the workplace a safer place.
EN 397 Industrial Safety Helmets
MANDATORY tests: IMPACT: Energy spread to the head form must not exceed 5 kN after the fall of an object of 5 kg at 1m high, performed at room temperature: +50°C and at -10°C. PENETRATION: The tip of the test mass used (3 kg from 1m height) must not come into contact with the skull, performed at room temperature: +50°C and at -10°C. FLAMMABILITY: The helmet is exposed to a flame, and it must not burn with flame emission more than 5 seconds after removal of the flame. OPTIONAL tests: EXTREME TEMPERATURE: testing impact and penetration are performed at +150°C, at -20°C or -30 °C temperatures. ELECTRICAL (440V A.C): Protects against a short accidental contact with electric leads under voltage up to 440 Vac. LATERAL DEFORMATION (LD): Protects against lateral compression. The maximum deformation of the helmet should be ≤40 mm. MOLTEN METAL (MM): The helmet is not deformed or penetrated by splashes of molten metal.Details
Share this product:
| Color | WHR White |
Once the user has seen at least one product this snippet will be visible.