FR22 Kominoshe Flake Duruese Anti-Insekte Bizflame
Kjo kominoshe super e lehte është dizenjuar për të siguruar mbrojtje të sigurte ndaj insekteve. Shtresa Anti-Insekte është ne fijet e peluheres që e ben mbrojtjen me të sigurte dhe pa ere. Kjo veshje siguron gjithashtu mbrojtje të plote FR zjarrduruese sipas normave të listuara me siper.
Veçoritë
Mbrojtje nga nxehtesia rezatuese, konvektive, dhe me kontakt
Peshe e Lehte
Mbrojtje maksimale kundër insekteve
10 Xhepa për ruajtje
Xhep vizore
Ambalazhimi i produktit është i pershatshem për tu reklamuar ne dyqan
Menge të rregullueshme Hook & loop
Zinxhir i Dyanshem për Hapje të Shpejte
CE-CAT III
Ka Shirit Flake Durues për Larje Industriale
pëlhurë e klasifikuar me UPF 40+ për të bllokuar 98% rrezeve UV
Lak për radio
Xhepa për mbrojteset e gjurit
Stil i Ri
Certifikim CE
Materialet:
Pëlhura Jashtme/Kryesore: Bizflame Plus: 99% Pambuk, 1% Fibra Karboni 210g
STANDARTET
EN ISO 11612 (A1+A2, B1, C1, E2, F1)
EN ISO 11611 Klasi 1 (A1+A2)
EN 1149-5
ASTM F1959/F1959M-12 (APTV 9.1CAL/CM²)
PORTWEST
For over 117 years we’ve possessed an unrelenting ambition to produce the world’s most trusted and requested protective wear. Through the decades, we have continuously proven our dedication to quality, producing world beating safety garments, foot protection, hand protection and PPE, while pushing the boundaries in protection technologies. Technologies that make the workplace a safer place.
EN ISO 11612 Heat & Flame
This test uses standard methods and conditions to predict the performance of fabric/garments in the event of contact with heat or flames. Specific testing is listed below: Dimensional change, Limited flame spread (A1+A2), Convective heat (B) - 3 levels, Radiant heat (C) - 4 levels, Molten aluminium splash (D) – 3 levels, Molten iron splash (E) – 3 levels, Contact heat (F) – 3 levels (temperature 250 degrees Celsius)Details
EN ISO 11611 Welding & Allied
Standard specifies two classes with specific performance requirements. Class 1: is protection against less hazardous welding techniques and situations causing lower levels of spatter and radiant heat. Class 2: is protection against more hazardous welding techniques and situations causing higher levels of spatter and radiant heat.Details
EN 1149 Anti-Static (ATEX)
This standard specifies PPE Clothing used in explosive environments (i.e. ATEX) where there is a risk that the garments could create sparks (source of ignition), which in turn could ignite explosive materials. Anti-Static garments marked EN 1149-5 are intended to be worn in Atex zones 1, 2, 20, 21 and 22. In oxygen enriched atmospheres or in zone 0, the Anti-Static garments should not be used without first being approved by a qualified Safety Engineer, as wear and tear can affect the protection of the garment and it is crucial that they are worn the correct way in these environments.Details
Share this product:
| Garment Size | S - Small or M - Medium or L - Large or XL - XLarge or XXL - XXLarge or XXXL - 3XLARGE |
| Color | NAR Navy |
Once the user has seen at least one product this snippet will be visible.