Glenroy Flame retardant, anti-static rain jacket
Equipped with seven pockets and two loops for gas detection meters or other gear, this functional parka is a real bestseller. The Hasnon has reflective FR strips for optimal visibility, while the flame-retardant and anti-static fabric further ensures your safety in this timeless rain parka. Thanks to the I.L.S. system, various fleeces, liners and softshells can be zipped in.
Features & design
Exterior
Straight collar
Foldaway hood in collar
Zip closure under flap with touch & close fastening
2 inset chest pockets with zip closure
2 patched pockets with flap with touch & close fastening
1 phone pocket
1 Napoleon pocket
2 loops for gas detectors
Round sleeves
Sleeve narrowing by touch and close fastening
Elasticated waist in the back + drawstring in the hem
Flame retardant reflective tape (50mm)
Back length 85 cm (L)
Interior
Fixed flame retardant cotton lining
1 inside pocket with zip closure
Zipper in back lining for applying logo or personalisation
Different linings/fleeces can be zipped in
Fabric
Siopor® Fr Ast: 100% polyester fabric with 100% FR PU coating + AST; ± 250 g/m²
European Standards
EN ISO 14116 : 2015 / Outer : IND. 1 - Inner : IND.3
EN 1149-5 : 2018
EN 13034 : 2005 + A1 : 2009 Type PB [6]
EN 343 : 2019 / Class 3-3-X
EN ISO 13688 : 2013
SIOEN Apparel
Sioen produces technical apparel for many different markets where people work in circumstances where safety, comfort and protection are major issues. Professional protective clothing — all weather, high visibility, multi norm, food and cold storage 1. SIP Protection — Forestry clothing. 2. Sioen Firefighter clothing. 3. Mullion — Floatation suits and life jackets. 4. Ursuit — Professional drysuits & diving suits. 5. Sioen Ballistics — Stab, slash and bullet proof garments. 6. Baleno — Outdoor leisure wear, hunting and fishing garments.
EN ISO 14116 Limited Flame Spread
Protective clothing complying with this standard is intended to protect workers against occasional and brief contact with small igniting flames in circumstances where there is no significant flame hazard and without the presence of another type of heat. Three different categories for flame spread, Index 1, 2 and 3. Index 1: garments should not be worn next to the skin. They must be worn over Index 2 or 3 garments. Index 2 or 3 garments can be worn next to the skin.Details
EN 1149 Anti-Static (ATEX)
This standard specifies PPE Clothing used in explosive environments (i.e. ATEX) where there is a risk that the garments could create sparks (source of ignition), which in turn could ignite explosive materials. Anti-Static garments marked EN 1149-5 are intended to be worn in Atex zones 1, 2, 20, 21 and 22. In oxygen enriched atmospheres or in zone 0, the Anti-Static garments should not be used without first being approved by a qualified Safety Engineer, as wear and tear can affect the protection of the garment and it is crucial that they are worn the correct way in these environments.Details
Treated FR Garments
FR treated fabrics are based on cotton, blended with polyester, para-aramid or polyamide. These fabrics get their FR property from the chemical treatment that is applied to the fabric. This chemical treatment is executed in such a way that it fully penetrates the fiber and as such is bonded throughout the entire fabric. As a result of this treatment, the fabric becomes flame retardant and keeps this property during the lifetime of the garment. PROS: very good protection against molten metal, good protection against heat and ARC, relatively cheap, good value for money in dirty environments where expected lifespan is not very long. CONS: wash fastness is typically not very good (pale look after several washes), to achieve similar FR properties as inherent FR the fabrics typically become a bit heavier and therefore tend to be a bit less comfortable.Details
Share this product:
Once the user has seen at least one product this snippet will be visible.