TAGLITE Low Voltage Detector 12 to 1000V AC / 1500 V DC

STANDARD
Standard: IEC 61243-3.
Compliant, enables compliance with the requirements of the code of practice general safety instructions UTE C 18-510 Electrical and Standard Operating Electrical NF EN 50110-1.

USE
The Low Voltage Detector allows the following functions to be implemented on both indoor and overhead installations:
• Check for the proving dead operation
• Control voltage levels from 12 to 1000V AC / 1500 V DC
• Polarity test on DC voltage
• Discrimination phase / neutral
• Phase indication (unipolar)
• Phase rotation
• Continuity check
• Functional self-test is performed which turn on all leds and emitting audible signal
• Measuring point lighting

ADVANTAGES
• Optimised visual indications: Visibility of indications in all working positions:
- 360° forward indication
- Rear visual indications
• Innovative IP2X system: Trigger system on the back of the device to release the thumb
• Safe IP2X sheath: 2-speed IP2X system with double-diameter test probes:
- Retraction of the first 5 mm through the trigger on the back of the device
- Push the sheath to retract remaining length
• Easy-to-reach and ergonomic button: Prominent button for easy gripping with insulating gloves.
• Ultra-flexible and robust cable: Ultra-flexible and robust double insulated cable without shape memory.
• AA battery with quick access: Increased autonomy with its 2 AA size batteries (Lithium batteries in option), accessible from the compartment at the back of the device.

TECHNICAL SPECIFICATIONS
Reference
Mechanical version
User manual
Dimensions
TAGLITERIFE
With IPX system
Pack F*
In the bag: 280 x 70 x 50mm
• 1 carrying bag
• User manual and user instruction / test certificate on the back of the bag
• Standard: IEC 61243-3
• Overvoltage category: CAT IV 1000 V
• Protection class: IP 65 according to IEC 60529 (DIN 40050): Can be used in wet conditions: outdoor use.
• Rated voltage range: 12 -1000 V AC / 12 - 1500 V DC
• Current consumption, measuring circuit: AC/DC max. < 3.5mA
• Polarity display: "+“ and “–” symbol
• Display voltage levels 12, 24, 50, 120, 230, 400, 690, 1000 V AC/DC and 1500 V DC
• Nominal frequency range: 15 to 60 Hz
• Phase display: Un ≥ 200 V, 50&60 Hz
• Test current, continuity test: max. 2 μA Test range, cross resistance: 0 - 100 Ω
• Acoustic sound level: 55 dB
• Turning on the device in measurement voltage: ≥ 12V
• Dedicated light indication for voltage upper that ELV (Extra Low Voltage) corresponds to > 50 V AC or > 120 V DC
• Built-in self test
• Power supply: 2 x LR06/AA batteries
• Weight: about 285g
• Connection cable with double silicone insulation : approximately 1200mm length
• Operating and storage temperature range: -15°C to +45°C and relative air humidity: 20% to 96% (climate category N).

ACCESSORIES
• 2 LR06 / AA batteries
• 1 carrying bag
• User manual and user instruction / test certificate on the back of the bag

Reference Mechanical version User manual Dimensions
TAGLITERIFE With IPX system Pack F* In the bag: 280 x 70 x 50mm

PENTA ESP (Electrical Safety Products)

We are PENTA 🚀 👷🏽‍♀️ Multinational industrial leader, pioneer and expert manufacturer of electrical safety solutions, committed to ensuring your safety at every intervention! 🤝 We are the essential partner for linemen, maintenance technicians and electricians working on power generation, transmission and distribution networks all over the world, and in 9 other areas of activity. With over 1200 employees in 18 subsidiaries worldwide, PENTA adapts its products to all electrical standards and regulations of each country. You will find our electrical safety solutions under different brands.

Share this product: