PW54 Endurance Plus Visor Helmet
ABS shell helmet, textile comfort harness 6 points, wheel ratchet adjustment, adjustable size 56-63 cm. Sweat band and chin strap included . Sold with retractable clear visor PW56 included. Spare parts available.
Features:
- Unvented helmet shell for safe use with electrical applications
- Electrical insulation up to 1000Vac or 1500Vdc (EN 50365)
- 6-point textile suspension harness for enhanced wearer comfort and safety
- Size adjustable headband via wheel ratchet system
- Retractable clear visor included
- Chin strap included
- Compatible with PW47 and PS47 clip-on ear muff
- Compatible accessories available
- Replacement visor available
- Available in multiple colourways
- Up to 7 years lifetime from manufacturing date (as long as undamaged)
- Electrical properties ( 440Vac)
- CE-CAT III
- Protection against Molten Metal
- Lateral deformation
- Anti-scratch coating for added durability
- Anti-fog coating for additional comfort to the wearer
- CE certified
Materials: ABS, Polycarbonate, 446g
Standards:
EN 397 (-30°C/+50°C, MM, LD, 440V a.c.)
EN 50365 Class:0
EN 166 (1 FT)
ANSI/ISEA Z89.1 TYPE I (CLASS E)
PORTWEST
For over 117 years we’ve possessed an unrelenting ambition to produce the world’s most trusted and requested protective wear. Through the decades, we have continuously proven our dedication to quality, producing world beating safety garments, foot protection, hand protection and PPE, while pushing the boundaries in protection technologies. Technologies that make the workplace a safer place.
EN 397 Industrial Safety Helmets
MANDATORY tests: IMPACT: Energy spread to the head form must not exceed 5 kN after the fall of an object of 5 kg at 1m high, performed at room temperature: +50°C and at -10°C. PENETRATION: The tip of the test mass used (3 kg from 1m height) must not come into contact with the skull, performed at room temperature: +50°C and at -10°C. FLAMMABILITY: The helmet is exposed to a flame, and it must not burn with flame emission more than 5 seconds after removal of the flame. OPTIONAL tests: EXTREME TEMPERATURE: testing impact and penetration are performed at +150°C, at -20°C or -30 °C temperatures. ELECTRICAL (440V A.C): Protects against a short accidental contact with electric leads under voltage up to 440 Vac. LATERAL DEFORMATION (LD): Protects against lateral compression. The maximum deformation of the helmet should be ≤40 mm. MOLTEN METAL (MM): The helmet is not deformed or penetrated by splashes of molten metal.Details
EN 50365 Electrical Insulating Helmets
This standard is for helmets used for working live or close to live parts on installations not exceeding 1000 V a.c. or 1500 V d.c. Testing to EN 50365 exceeds testing under EN397 for electrical properties. Marking: double triangle + class +batch number.Details
Share this product:
| Color | RER Red or ORR Orange or YER Yellow or RBR Royal Blue or WHR White |
Once the user has seen at least one product this snippet will be visible.