PG54 Endurance Glowtex Helmet

Endurance helmet with 6 points textile harness and wheel ratchet adjustable size 56-63cm. The ABS shell is made with special photo-luminescent additive colour, that accumulates the light in well lit places and release the shining effect in very low or no light conditions – i.e. it glows in the dark. Sold with 4 points chin strap included.

Features:
- Unvented helmet shell for safe use with electrical applications
- Glow effect in the dark thanks to photo-luminescent additive
- Electrical insulation up to 1000Vac or 1500Vdc (EN 50365)
- 6-point textile suspension harness for enhanced wearer comfort and safety
- Size adjustable headband via wheel ratchet system
- Chin strap included
- Compatible accessories available
- Electrical properties ( 440Vac)
- Compatible with PW47 and PS47 clip-on ear muff
- Up to 7 years lifetime from manufacturing date (as long as undamaged)
- CE-CAT III
- Lateral deformation
- CE certified
- Protection against Molten Metal

Materials: ABS, 472g

Standards:
EN 397 (-30°C/+50°C, MM, LD, 440V a.c.)
EN 50365 Class:0

18.96 € 18.96 EUR 18.96 €

2,507.86 Lek


  • Color

This combination does not exist.

Add to Cart Buy Now

PORTWEST
PORTWEST

For over 117 years we’ve possessed an unrelenting ambition to produce the world’s most trusted and requested protective wear. Through the decades, we have continuously proven our dedication to quality, producing world beating safety garments, foot protection, hand protection and PPE, while pushing the boundaries in protection technologies. Technologies that make the workplace a safer place.


EN 397 Industrial Safety Helmets
MANDATORY tests: IMPACT: Energy spread to the head form must not exceed 5 kN after the fall of an object of 5 kg at 1m high, performed at room temperature: +50°C and at -10°C. PENETRATION: The tip of the test mass used (3 kg from 1m height) must not come into contact with the skull, performed at room temperature: +50°C and at -10°C. FLAMMABILITY: The helmet is exposed to a flame, and it must not burn with flame emission more than 5 seconds after removal of the flame. OPTIONAL tests: EXTREME TEMPERATURE: testing impact and penetration are performed at +150°C, at -20°C or -30 °C temperatures. ELECTRICAL (440V A.C): Protects against a short accidental contact with electric leads under voltage up to 440 Vac. LATERAL DEFORMATION (LD): Protects against lateral compression. The maximum deformation of the helmet should be ≤40 mm. MOLTEN METAL (MM): The helmet is not deformed or penetrated by splashes of molten metal.
Details
EN 50365 Electrical Insulating Helmets
This standard is for helmets used for working live or close to live parts on installations not exceeding 1000 V a.c. or 1500 V d.c. Testing to EN 50365 exceeds testing under EN397 for electrical properties. Marking: double triangle + class +batch number.
Details

Best Value 
Fast Delivery
Quality Consistency

Share this product:
This is a preview of the recently viewed products by the user.
Once the user has seen at least one product this snippet will be visible.
Recently viewed Products