FR503 WX3 FR комбинезон, Inherent FR
Модерна FR комбинезон направен од нашата инхерентна Modaflame 280гр ткаенина. Иновативните карактеристики на дизајнот како растегливите панели обезбедуваат одличен комфор и флексибилност во клучните делови на движење. Други клучни карактеристики вклучуваат компоненти без метал,задна вентилација,прилагодлива половина, превиткани ракави, прилагодливи манжетни, извезени FR логоа и повеќе џебови за доволно складирање.,
Карактеристики
Инхерентно пламен отпорни квалитети нема да се намали
заштита од зрачење, конвективни и контакт на топлина
Повеќе џебови
Stretch panelling во клучните делови овозможуваат одличен комфор и флексибилност
Сегментна рефлектирачка лента нанесена со топлина за зголемена видливост
Пропустливи од позади за дишливост и удобност
Нов модел
CE-CAT III
Овој симбол означува дека ткаенинате има UPF рејтинг 40+ и блокира 98% од UV зраците кои паѓаат врз облеката
Овој симбол укажува дека патентот може да биде отворен од горната и долната страна на облеката.
Високо видливи бои
Еластичен колан за убаво прилегање
Растегливиот дел на препоните овозможува максимална флексибилност и го намалува оптоварувањето
Прилагодлив раб за прилагодување на сите должини на ногавиците
Џеб за метар
Две нивоа на џебови за штитници за колено овозможувајќи две опции за позиционирање
Сертифицирано од европската комисија
100% без метал
10 џебови за голем багаж
Материјали:
Ткаенина на внатрешноста: Modaflame: 60% Modacrylic, 39% памук, 1% јаглеродно влакно, 280g
Контрастна ткаенина: Modaflame Stretch: 60% Modacrylic , 36% памук, 3% еластан, 1% јаглеродни влакна
Стандарди
EN ISO 11612 (A1+A2, B1,C1,F1)
EN ISO 11611 Класа 1 (A1+A2)
EN 1149-5
IEC 61482-2 IEC 61482-1-1 (Elim 6.4 CAL/CM²)
IEC 61482-2 IEC 61482-1-2 APC 1
EN 13034 ТИП 6
ASTM F1959/F1959M-12 (ATPV=8.4CAL/CM²(HAF=75.8%))
PORTWEST WX3
RELIABLE PROTECTION WHATEVER THE INDUSTRY Work environments can be tough on clothing, WX3™ workwear is designed to withstand tough conditions, combining reinforced stitching, abrasion-resistant panels, and our most durable fabrics. This combination of durable and robust fabrics, improved fit and better stretchability allows the wearer to move more freely, enhancing comfort and flexibility. Available in the core colours demanded by industry, WX3™ allows you to offer a uniform look to your workforce, regardless of their function and colour preference. With inner and outer pieces that can be layered up or down, WX3 offers exceptional versatility regardless of climate or industry.
EN ISO 11612 Heat & Flame
This test uses standard methods and conditions to predict the performance of fabric/garments in the event of contact with heat or flames. Specific testing is listed below: Dimensional change, Limited flame spread (A1+A2), Convective heat (B) - 3 levels, Radiant heat (C) - 4 levels, Molten aluminium splash (D) – 3 levels, Molten iron splash (E) – 3 levels, Contact heat (F) – 3 levels (temperature 250 degrees Celsius)Details
EN ISO 11611 Welding & Allied
Standard specifies two classes with specific performance requirements. Class 1: is protection against less hazardous welding techniques and situations causing lower levels of spatter and radiant heat. Class 2: is protection against more hazardous welding techniques and situations causing higher levels of spatter and radiant heat.Details
IEC 61482-2 Protective Clothing Thermal Arc Hazards
Standard for protective clothing against the thermal effects of an electric arc event. Two different test methods: Open Arc IEC 61482-1-1 and Box test EN 61482-1-2. OPEN ARC - IEC 61842-1-1 (USA). The first result, ELIM - The maximum incident energy (cal/cm²) the garment can withstand before the wearer would have a 0% probability of a second degree burn. The second result is either: ATPV (Arc Thermal Performance Value, cal/cm²) The maximum incident energy the garment can withstand before the wearer would have 50% probability of a second degree burn or EBT (Energy Break Open Threshold, cal/cm²) The incident energy at which a 50% probability of a breakopen occurs resulting in a second degree burn. Since ELIM indicates an energy value at 0% probability of a second degree burn and ATPV/EBT at 50% probability, the ELIM value is usually lower than ATPV/EBT. Large differences between the ELIM and ATPV/EBT results highlight the importance of wearing several layers of garments to ensure you are properly protected. EN 61482-1-2 (Europe) is evaluated in two classes in the same test: APC1 protects against electric arc of 4kA (arc energy 168 kJ), APC2 protects against electric arc of 7kA (arc energy 320 kJ). Unlike the American standard, there is not a result scale in this garment tests, only two levels where the garment either passes or fails. A garment with one layer of Flame Retardant fabric usually passes APC 1 - even thin shirt fabrics. To pass APC 2, a system with two or three fabric layers or a lined garment is normally required. This makes it more difficult to adapt the protection to the risk, without compromising on comfort. As APC 1 is a relatively low level of protection, we always recommend a basic protection of at least 8 cal/cm².Details
EN 13034 Liquid Chemicals
Standard for protection of a potential exposure to a light spray, liquid aerosols or low pressure, low volume splashes when complete liquid permeation barrier (at a molecular level) is not required. The following chemical groups/chemicals can be tested: H2SO4 30% (Sulphuric acid), NaOH 10% (Sodium hydroxide also called lye and caustic soda), O-xylene, Butanol. The result is given in scale 1-3 where the maximum value is 3. To pass the test and be able to use the EN 13034 symbol in the CE-marking, at least one chemical shall obtain level 3 for liquid repellency and at least one chemical shall obtain level 2 for resistance to penetration.Details
Inherent FR Garments
Inherent fabric guarantees lifelong protection for the wearer. The FR properties lie in the molecular structure of the fibres and cannot be washed or worn out. PROS: excellent heat and ARC protection, excellent colour fastness even after numerous washings hence good cost in use performance, typically lighter weight solutions with excellent comfort levels, typically used in less dirty environments where the corporate look is also important. CONS: limited protection against molten metal splash, typically a more expensive fabric than FR treated. The most common FR fibers used in protective clothing are modacrylics and aramidsDetails
Споделете :
| Големини - Облека | S - Small or M - Medium or L - Large or XL - XLarge or XXL - XXLarge or XXXL - 3XLARGE |
| Боја | BKR Црна |
Once the user has seen at least one product this snippet will be visible.