FR38 Комбинезон Bizflame Work
Со својот дизајн и современ крој, овој модерен комбинезон е дополнување на огноотпорниот ранг. Нудејќи ги сите карактеристики на нашиот победнички Biz 1 комбинезон, овој стил гарантира максимален комфор, перформанси и заштита.
Карактеристики
заштита од зрачење, конвективни и контакт на топлина
заштита од зрачење, конвективни и контакт на топлина
Градни џебови
Џеб за метар
Мажетни со затегач за подесување за сигурно вклопување
Надворешна етикета за стандарди за брза идентификација на нивото на заштита
Патенти од месинг
Појачани на сите стрес точки
Овој симбол означува дека облеката има јамка(држачи) за лесно прокачување на радио.
Скриен џеб за телефон
CE-CAT III
Овој симбол укажува дека патентот може да биде отворен од горната и долната страна на облеката.
6 џебови за голем багаж
Овој симбол означува дека ткаенинате има UPF рејтинг 40+ и блокира 98% од UV зраците кои паѓаат врз облеката
Сертифицирано од европската комисија
Материјали:
Ткаенина на внатрешноста: Bizflame Pro 99% памук, 1% јаглеродно влакно, 330g
Стандарди
EN ISO 11612 (A1+A2, B1, C1, E3, F1)
EN ISO 11611 Класа 1 (A1+A2)
EN 1149-5
PORTWEST
For over 117 years we’ve possessed an unrelenting ambition to produce the world’s most trusted and requested protective wear. Through the decades, we have continuously proven our dedication to quality, producing world beating safety garments, foot protection, hand protection and PPE, while pushing the boundaries in protection technologies. Technologies that make the workplace a safer place.
EN ISO 11612 Heat & Flame
This test uses standard methods and conditions to predict the performance of fabric/garments in the event of contact with heat or flames. Specific testing is listed below: Dimensional change, Limited flame spread (A1+A2), Convective heat (B) - 3 levels, Radiant heat (C) - 4 levels, Molten aluminium splash (D) – 3 levels, Molten iron splash (E) – 3 levels, Contact heat (F) – 3 levels (temperature 250 degrees Celsius)Details
EN ISO 11611 Welding & Allied
Standard specifies two classes with specific performance requirements. Class 1: is protection against less hazardous welding techniques and situations causing lower levels of spatter and radiant heat. Class 2: is protection against more hazardous welding techniques and situations causing higher levels of spatter and radiant heat.Details
EN 1149 Anti-Static (ATEX)
This standard specifies PPE Clothing used in explosive environments (i.e. ATEX) where there is a risk that the garments could create sparks (source of ignition), which in turn could ignite explosive materials. Anti-Static garments marked EN 1149-5 are intended to be worn in Atex zones 1, 2, 20, 21 and 22. In oxygen enriched atmospheres or in zone 0, the Anti-Static garments should not be used without first being approved by a qualified Safety Engineer, as wear and tear can affect the protection of the garment and it is crucial that they are worn the correct way in these environments.Details
Treated FR Garments
FR treated fabrics are based on cotton, blended with polyester, para-aramid or polyamide. These fabrics get their FR property from the chemical treatment that is applied to the fabric. This chemical treatment is executed in such a way that it fully penetrates the fiber and as such is bonded throughout the entire fabric. As a result of this treatment, the fabric becomes flame retardant and keeps this property during the lifetime of the garment. PROS: very good protection against molten metal, good protection against heat and ARC, relatively cheap, good value for money in dirty environments where expected lifespan is not very long. CONS: wash fastness is typically not very good (pale look after several washes), to achieve similar FR properties as inherent FR the fabrics typically become a bit heavier and therefore tend to be a bit less comfortable.Details
Споделете :
| Големини - Облека | S - Small or M - Medium or L - Large or XL - XLarge or XXL - XXLarge or XXXL - 3XLARGE |
| Боја | NAR Тегет |
Once the user has seen at least one product this snippet will be visible.