BZ12 Bizweld кабаница со качулка
Дизајнирана да даде максимална заштита и комфор на носителот, нашата Bizweld кабаница ќе помогне да останете заштитени во опасни работни средини. Кабаницата е изработена со врвца за прилагодување за комотно носење од истата ткаенина. Задолжително да се комбинира со соодветен комбинезон или јакна и пантолони.
Карактеристики
заштита од зрачење, конвективни и контакт на топлина
заштита од зрачење, конвективни и контакт на топлина
Дизајниран за удобност
CE-CAT III
Овој симбол означува дека ткаенинате има UPF рејтинг 40+ и блокира 98% од UV зраците кои паѓаат врз облеката
Сертифицирано од европската комисија
Материјали:
Ткаенина на внатрешноста: Bizweld: 100% памук, FR завршна обработка, 330g
Стандарди
EN ISO 11612 (A1+A2, B1, C1, E2, F1)
EN ISO 11611 Класа 1 (A1+A2)
ASTM F1959/F1959M-12 (ATPV 11.2 CAL/CM² (HAF = 80.4%))
PORTWEST
For over 117 years we’ve possessed an unrelenting ambition to produce the world’s most trusted and requested protective wear. Through the decades, we have continuously proven our dedication to quality, producing world beating safety garments, foot protection, hand protection and PPE, while pushing the boundaries in protection technologies. Technologies that make the workplace a safer place.
EN ISO 11612 Heat & Flame
This test uses standard methods and conditions to predict the performance of fabric/garments in the event of contact with heat or flames. Specific testing is listed below: Dimensional change, Limited flame spread (A1+A2), Convective heat (B) - 3 levels, Radiant heat (C) - 4 levels, Molten aluminium splash (D) – 3 levels, Molten iron splash (E) – 3 levels, Contact heat (F) – 3 levels (temperature 250 degrees Celsius)Details
EN ISO 11611 Welding & Allied
Standard specifies two classes with specific performance requirements. Class 1: is protection against less hazardous welding techniques and situations causing lower levels of spatter and radiant heat. Class 2: is protection against more hazardous welding techniques and situations causing higher levels of spatter and radiant heat.Details
Treated FR Garments
FR treated fabrics are based on cotton, blended with polyester, para-aramid or polyamide. These fabrics get their FR property from the chemical treatment that is applied to the fabric. This chemical treatment is executed in such a way that it fully penetrates the fiber and as such is bonded throughout the entire fabric. As a result of this treatment, the fabric becomes flame retardant and keeps this property during the lifetime of the garment. PROS: very good protection against molten metal, good protection against heat and ARC, relatively cheap, good value for money in dirty environments where expected lifespan is not very long. CONS: wash fastness is typically not very good (pale look after several washes), to achieve similar FR properties as inherent FR the fabrics typically become a bit heavier and therefore tend to be a bit less comfortable.Details
Споделете :
| Боја | NAR Тегет |
Once the user has seen at least one product this snippet will be visible.