ST41 Kominoshe BizTex Microporous me Mbulesë për Këpucët Tipi 6/5
Kominoshe të lehta e jetëgjatë me rehati dhe ajrosje superiore. Mundësojnë rezistencë ndaj ujit, grimcave dhe baktereve. Këto kominoshe përfshijnë edhe një pjesë mbulimi në këmbë, e cila ofron siguri në ecje për shmangien e rrëshqitjes.
Veçoritë
Pushavitje të ulet dhe e forte
Antistatike
Mbrojtese njeperdorimshe cizmesh për mbrojtje deri të kyci
Menge elastike për pershtatje me të mire
Kapak Mbulues Zinxhiri për Mrojtje me të Madhe
Kapuç me forme ergonomike për pershtatje të mire
Certifikim CE
Ambalazhimi i produktit është i pershatshem për tu reklamuar ne dyqan
CE-CAT III
Ky produkt shitet me kuti
Materialet:
Pëlhura Jashtme/Kryesore: BizTex Micro 60g
STANDARTET
EN ISO 13982 Tipi 5B
EN 13034 Tipi 6B
EN 1073-2
EN 1149-5
EN 14126
PORTWEST
For over 117 years we’ve possessed an unrelenting ambition to produce the world’s most trusted and requested protective wear. Through the decades, we have continuously proven our dedication to quality, producing world beating safety garments, foot protection, hand protection and PPE, while pushing the boundaries in protection technologies. Technologies that make the workplace a safer place.
EN 1149 Anti-Static (ATEX)
This standard specifies PPE Clothing used in explosive environments (i.e. ATEX) where there is a risk that the garments could create sparks (source of ignition), which in turn could ignite explosive materials. Anti-Static garments marked EN 1149-5 are intended to be worn in Atex zones 1, 2, 20, 21 and 22. In oxygen enriched atmospheres or in zone 0, the Anti-Static garments should not be used without first being approved by a qualified Safety Engineer, as wear and tear can affect the protection of the garment and it is crucial that they are worn the correct way in these environments.Details
EN 13034 Liquid Chemicals
Standard for protection of a potential exposure to a light spray, liquid aerosols or low pressure, low volume splashes when complete liquid permeation barrier (at a molecular level) is not required. The following chemical groups/chemicals can be tested: H2SO4 30% (Sulphuric acid), NaOH 10% (Sodium hydroxide also called lye and caustic soda), O-xylene, Butanol. The result is given in scale 1-3 where the maximum value is 3. To pass the test and be able to use the EN 13034 symbol in the CE-marking, at least one chemical shall obtain level 3 for liquid repellency and at least one chemical shall obtain level 2 for resistance to penetration.Details
Share this product:
| Garment Size | M - Medium or L - Large or XL - XLarge or XXL - XXLarge or XXXL - 3XLARGE |
| Color | WHR White |
Once the user has seen at least one product this snippet will be visible.