PS80 Helmetë me Vizor Mbrojtës te Integruar
Prezantimi i helmetës sonë inovative dhe elegante të sigurisë, të pajisur me një vizore të integruar për përdorim të përshtatshëm. Vizitori mund të shtyhet lehtësisht përsëri në kaskën e kaskës, duke siguruar ruajtje të sigurt kur nuk përdoret. Me certifikim të dyfishtë (EN 397 dhe EN 12492), kjo helmetë ofron fleksibilitet dhe shkathtësi me dy opsione për rripat e mjekrës. Ventilimi i helmetës lejon rrjedhjen optimale të ajrit, duke siguruar një efekt freskues gjatë përdorimit. Brenda guaskës, shkuma EPS rrit komoditetin dhe siguron siguri të shtuar.
Veçoritë
UKCA marked
CE certified
Retail box which aids presentation for retail sales
Wheel ratchet size adjustment for easy fitting
Safe stowing of visor inside helmet shell
Injection moulded PC visor for high performance
Inner expanded polystyrene foam
Vented helmet shell to allow air circulation cooling the wearer's head
Materiali: ABS, EPS (polistiren i zgjeruar), Polikarbonat, 480g
STANDARTET
EN 397
EN 12492
EN 166
PORTWEST
For over 117 years we’ve possessed an unrelenting ambition to produce the world’s most trusted and requested protective wear. Through the decades, we have continuously proven our dedication to quality, producing world beating safety garments, foot protection, hand protection and PPE, while pushing the boundaries in protection technologies. Technologies that make the workplace a safer place.
EN 397 Industrial Safety Helmets
MANDATORY tests: IMPACT: Energy spread to the head form must not exceed 5 kN after the fall of an object of 5 kg at 1m high, performed at room temperature: +50°C and at -10°C. PENETRATION: The tip of the test mass used (3 kg from 1m height) must not come into contact with the skull, performed at room temperature: +50°C and at -10°C. FLAMMABILITY: The helmet is exposed to a flame, and it must not burn with flame emission more than 5 seconds after removal of the flame. OPTIONAL tests: EXTREME TEMPERATURE: testing impact and penetration are performed at +150°C, at -20°C or -30 °C temperatures. ELECTRICAL (440V A.C): Protects against a short accidental contact with electric leads under voltage up to 440 Vac. LATERAL DEFORMATION (LD): Protects against lateral compression. The maximum deformation of the helmet should be ≤40 mm. MOLTEN METAL (MM): The helmet is not deformed or penetrated by splashes of molten metal.Details
EN 12492 Helmets for mountaineers
This standard covers specialist mountaineers’ helmet and it includes tests on helmet retention strength and effectiveness to ensure the helmet is not inadvertently removed. To reflect the nature of the use, Impact and penetration tests are conducted on different points around the shell.Details
Share this product:
| Color | ORR Orange or YER Yellow or WHR White |
Once the user has seen at least one product this snippet will be visible.