PS54 Helmetë Endurance Plus
Helmeta Endurance me guaskë ABS pa ventilim përmban një skilet te brendshem tekstili me 6 pika me rregullim të madhësisë me togez dhe një rrip mjekër me 4 pika i përfshirë.
Veçoritë
Skileti i helmetës pa ventilim për përdorim të sigurt me aplikime elektrike
Izolim elektrik deri ne 1000Vac ose 1500Vdc (EN 50365)
Skileti i brendshem amortizues me 6 pika kapje ne helmet për rehati dhe siguri të shtuar të përdoruesit
Shirit për kokë me madhësi të rregullueshme me togezen rrotulluese
Lidhesja e mjekrres e perfshire
Aksesore zevendesimi të disponueshem
Mbrojtese degjimi Clip-On e përshtatshme me PW47 DHE PS47
Veti elektrike ( 440Vac)
Deri në 7 vjet jetë nga data e prodhimit (për aq kohë sa i padëmtuar)
CE-CAT III
Mbrojtje ndaj Metalit të Shkrire
Deformim anesore
Certifikim CE
Materiali: ABS, 416g
STANDARTET
EN 397 (-30°C / +50°C, MM, LD, 440V a.c.)
EN 50365 Klasi:0
ANSI/ISEA Z89.1 Tipi I (Klasi E)
AS/NZS 1801
PORTWEST
For over 117 years we’ve possessed an unrelenting ambition to produce the world’s most trusted and requested protective wear. Through the decades, we have continuously proven our dedication to quality, producing world beating safety garments, foot protection, hand protection and PPE, while pushing the boundaries in protection technologies. Technologies that make the workplace a safer place.
EN 397 Industrial Safety Helmets
MANDATORY tests: IMPACT: Energy spread to the head form must not exceed 5 kN after the fall of an object of 5 kg at 1m high, performed at room temperature: +50°C and at -10°C. PENETRATION: The tip of the test mass used (3 kg from 1m height) must not come into contact with the skull, performed at room temperature: +50°C and at -10°C. FLAMMABILITY: The helmet is exposed to a flame, and it must not burn with flame emission more than 5 seconds after removal of the flame. OPTIONAL tests: EXTREME TEMPERATURE: testing impact and penetration are performed at +150°C, at -20°C or -30 °C temperatures. ELECTRICAL (440V A.C): Protects against a short accidental contact with electric leads under voltage up to 440 Vac. LATERAL DEFORMATION (LD): Protects against lateral compression. The maximum deformation of the helmet should be ≤40 mm. MOLTEN METAL (MM): The helmet is not deformed or penetrated by splashes of molten metal.Details
EN 50365 Electrical Insulating Helmets
This standard is for helmets used for working live or close to live parts on installations not exceeding 1000 V a.c. or 1500 V d.c. Testing to EN 50365 exceeds testing under EN397 for electrical properties. Marking: double triangle + class +batch number.Details
Share this product:
| Color | ORR Orange or YER Yellow or RBR Royal Blue or WHR White |
Once the user has seen at least one product this snippet will be visible.