FR92 Pantallona Hi-Vis Bizflame Pro
Ky dizajn bashkohor ofron mbrojtjen maksimale të standarteve të shumta EN dhe garanton rehati të lartë. Këto pantallon me dukshmëri të lartë kanë si veçori një xhep të gjërë me akses të lehtë anësor në këmbë, xhep funksional për vizore dhe dy xhepa të bollshëm mbrapa.
Veçoritë
Mbrojtje nga nxehtesia rezatuese, konvektive, dhe me kontakt
E certifikuar për mbrojtjen nga skorjet e metaleve të shkrira
Xhep vizore
Akses i lehte të xhepi mbajtes
Panele me kontrast për mbrojtje ndaj njollave
Qepje të trefishte për qëndrueshmëri shtesë
Zinxhire bronxi për durushmerishe të gjate
Ngjyra me kontrast për shtim stilesh
Antistatike
Xhepa për mbrojteset e gjurit
Ka Shirit reflektues flake durues cilesia e larte
Bel gjysem elastik
6 xhepa për hapsire mbajtese me të madhe
Certifikim CE
CE-CAT III
pëlhurë e klasifikuar me UPF 40+ për të bllokuar 98% rrezeve UV
Materialet:
Pëlhura Jashtme/Kryesore: Bizflame Pro: 99% Pambuk, 1% Fibra Karboni 330g
STANDARTET
EN ISO 11612 (A1+A2, B1, C1, E3, F1)
EN ISO 11611 Klasi 1 (A1+A2)
EN 1149-5
EN ISO 20471 Klasi 2
PORTWEST
For over 117 years we’ve possessed an unrelenting ambition to produce the world’s most trusted and requested protective wear. Through the decades, we have continuously proven our dedication to quality, producing world beating safety garments, foot protection, hand protection and PPE, while pushing the boundaries in protection technologies. Technologies that make the workplace a safer place.
EN ISO 20471 Hi-Vis Class 2
EN ISO 20471 is divided into three classes, the requirement for the area consisting of reflectors and fluorescent materials – that determines which class you need to choose. Minimum areas of visible material in m². Class 3: Reflective Tape = 0.20m², Fluorescent material = 0.80m². Class 2: Reflective Tape = 0.13m², Fluorescent material = 0.50m². Class 1: Reflective Tape = 0.10m², Fluorescent material = 0.14m². The highest class is class 3. There are two ways to attain class 3. Either choose an EN ISO 20471 product that is rated class 3 on its own (e.g. a jacket) or choose two products that together are class 3 certified.Details
EN ISO 11612 Heat & Flame
This test uses standard methods and conditions to predict the performance of fabric/garments in the event of contact with heat or flames. Specific testing is listed below: Dimensional change, Limited flame spread (A1+A2), Convective heat (B) - 3 levels, Radiant heat (C) - 4 levels, Molten aluminium splash (D) – 3 levels, Molten iron splash (E) – 3 levels, Contact heat (F) – 3 levels (temperature 250 degrees Celsius)Details
EN ISO 11611 Welding & Allied
Standard specifies two classes with specific performance requirements. Class 1: is protection against less hazardous welding techniques and situations causing lower levels of spatter and radiant heat. Class 2: is protection against more hazardous welding techniques and situations causing higher levels of spatter and radiant heat.Details
EN 1149 Anti-Static (ATEX)
This standard specifies PPE Clothing used in explosive environments (i.e. ATEX) where there is a risk that the garments could create sparks (source of ignition), which in turn could ignite explosive materials. Anti-Static garments marked EN 1149-5 are intended to be worn in Atex zones 1, 2, 20, 21 and 22. In oxygen enriched atmospheres or in zone 0, the Anti-Static garments should not be used without first being approved by a qualified Safety Engineer, as wear and tear can affect the protection of the garment and it is crucial that they are worn the correct way in these environments.Details
Treated FR Garments
FR treated fabrics are based on cotton, blended with polyester, para-aramid or polyamide. These fabrics get their FR property from the chemical treatment that is applied to the fabric. This chemical treatment is executed in such a way that it fully penetrates the fiber and as such is bonded throughout the entire fabric. As a result of this treatment, the fabric becomes flame retardant and keeps this property during the lifetime of the garment. PROS: very good protection against molten metal, good protection against heat and ARC, relatively cheap, good value for money in dirty environments where expected lifespan is not very long. CONS: wash fastness is typically not very good (pale look after several washes), to achieve similar FR properties as inherent FR the fabrics typically become a bit heavier and therefore tend to be a bit less comfortable.Details
Share this product:
| Garment Size | S - Small or M - Medium or L - Large or XL - XLarge or XXL - XXLarge |
| Color | YER Yellow |
Once the user has seen at least one product this snippet will be visible.