Best Price

BIZ2 Xhaketë Bizweld

Xhaketa Bizweld e mundëson mbrojtje dhe rehati gjatë gjithë ditës për saldatorë dhe punonjësit e tjerë. Veçoritë përfshijnë mbyllje me kopsa të sigurtë dhe dy xhepa në kraharor me kapak. Kjo xhaketë është rezistente ndaj flakëve e copëzave të nxehta dhe ka edhe një xhep për telefon.

Veçoritë
Mbrojtje nga nxehtesia rezatuese, konvektive, dhe me kontakt
E certifikuar për mbrojtjen nga skorjet e metaleve të shkrira
Xhepa të kraharorit me kapak, mbyllur me kopce
Të rregullueshme me kopsa
Kopsa të fshehura para
Etiketa e standarteve e jashteme të Krahu për identifikimin e niveleve të mbrojtjes
Gjenden ne masa nga XS deri ne 5XL
Ambalazhimi i produktit është i pershatshem për tu reklamuar ne dyqan
Lak për radio
Xhep telefoni i fshehur
3 xhepa për vendosje të sigurte
pëlhurë e klasifikuar me UPF 40+ për të bllokuar 98% rrezeve UV
CE-CAT III
Certifikim CE

Materialet:
Pëlhura Jashtme/Kryesore: Bizweld: 100% Pambuk, Sipërfaqe Flakë-Duruese 330g

STANDARTET
EN ISO 11612 (A1+A2, B1, C1, E2, F1)
EN ISO 11611 Klasi 1 (A1+A2)
IEC 61482-2 IEC 61482-1-1 (Elim 8.3 CAL/CM²)
ASTM F1959/F1959M-12 (ATPV 11.2 CAL/CM² (HAF = 80.4%))

39.13 € 39.13 EUR 39.13 €

4,443.47 Lek


  • Color
  • Garment Size

This combination does not exist.

Add to Cart Buy Now

PORTWEST
PORTWEST

For over 117 years we’ve possessed an unrelenting ambition to produce the world’s most trusted and requested protective wear. Through the decades, we have continuously proven our dedication to quality, producing world beating safety garments, foot protection, hand protection and PPE, while pushing the boundaries in protection technologies. Technologies that make the workplace a safer place.


EN ISO 11612 Heat & Flame
This test uses standard methods and conditions to predict the performance of fabric/garments in the event of contact with heat or flames. Specific testing is listed below: Dimensional change, Limited flame spread (A1+A2), Convective heat (B) - 3 levels, Radiant heat (C) - 4 levels, Molten aluminium splash (D) – 3 levels, Molten iron splash (E) – 3 levels, Contact heat (F) – 3 levels (temperature 250 degrees Celsius)
Details
EN ISO 11611 Welding & Allied
Standard specifies two classes with specific performance requirements. Class 1: is protection against less hazardous welding techniques and situations causing lower levels of spatter and radiant heat. Class 2: is protection against more hazardous welding techniques and situations causing higher levels of spatter and radiant heat.
Details
IEC 61482-2 Protective Clothing Thermal Arc Hazards
Standard for protective clothing against the thermal effects of an electric arc event. Two different test methods: Open Arc IEC 61482-1-1 and Box test EN 61482-1-2. OPEN ARC - IEC 61842-1-1 (USA). The first result, ELIM - The maximum incident energy (cal/cm²) the garment can withstand before the wearer would have a 0% probability of a second degree burn. The second result is either: ATPV (Arc Thermal Performance Value, cal/cm²) The maximum incident energy the garment can withstand before the wearer would have 50% probability of a second degree burn or EBT (Energy Break Open Threshold, cal/cm²) The incident energy at which a 50% probability of a breakopen occurs resulting in a second degree burn. Since ELIM indicates an energy value at 0% probability of a second degree burn and ATPV/EBT at 50% probability, the ELIM value is usually lower than ATPV/EBT. Large differences between the ELIM and ATPV/EBT results highlight the importance of wearing several layers of garments to ensure you are properly protected. EN 61482-1-2 (Europe) is evaluated in two classes in the same test: APC1 protects against electric arc of 4kA (arc energy 168 kJ), APC2 protects against electric arc of 7kA (arc energy 320 kJ). Unlike the American standard, there is not a result scale in this garment tests, only two levels where the garment either passes or fails. A garment with one layer of Flame Retardant fabric usually passes APC 1 - even thin shirt fabrics. To pass APC 2, a system with two or three fabric layers or a lined garment is normally required. This makes it more difficult to adapt the protection to the risk, without compromising on comfort. As APC 1 is a relatively low level of protection, we always recommend a basic protection of at least 8 cal/cm².
Details
ISO 13506 Manikin Fire Test
This test method provides the general principles for evaluating the performance of complete garments or protective clothing ensembles in a flash fire or other short duration exposures where the Burn Injury Prediction 0% is measured.
Details
Treated FR Garments
FR treated fabrics are based on cotton, blended with polyester, para-aramid or polyamide. These fabrics get their FR property from the chemical treatment that is applied to the fabric. This chemical treatment is executed in such a way that it fully penetrates the fiber and as such is bonded throughout the entire fabric. As a result of this treatment, the fabric becomes flame retardant and keeps this property during the lifetime of the garment. PROS: very good protection against molten metal, good protection against heat and ARC, relatively cheap, good value for money in dirty environments where expected lifespan is not very long. CONS: wash fastness is typically not very good (pale look after several washes), to achieve similar FR properties as inherent FR the fabrics typically become a bit heavier and therefore tend to be a bit less comfortable.
Details

Best Value 
Fast Delivery
Quality Consistency

Share this product:
Color BKR Black or ORR Orange or NAR Navy
Garment Size XS - XSmall or S - Small or M - Medium or L - Large or XL - XLarge or XXL - XXLarge or XXXL - 3XLARGE or 4XL - 4XLarge or 5XL - 5XLarge
Similar Products
This is a preview of the recently viewed products by the user.
Once the user has seen at least one product this snippet will be visible.
Recently viewed Products