AF91 Kominoshe Araflame Fosforeshente Multi-Mbrojtje
Pëlhura me ngjyrë portokalli dhe shiritat fosforeshente sipas standardit EN ISO 20471 shërbejnë për dukshmëri të lartë.
Veçoritë
Vetite flakerezistuese nuk veniten gjate larjeve
Mbrojtje nga nxehtesia rezatuese, konvektive, dhe me kontakt
Xhep vizore
Xhepa të gjere anesore
Zinxhire bronxi për durushmerishe të gjate
Menge të rregullueshme Hook & loop
Ka Shirit Flake Durues për Larje Industriale
CE-CAT III
Zinxhir i Dyanshem për Hapje të Shpejte
Lak për radio
6 xhepa për hapsire mbajtese me të madhe
Certifikim CE
pëlhurë e klasifikuar me UPF 40+ për të bllokuar 98% rrezeve UV
Materialet:
Pëlhura Jashtme/Kryesore: Araflame Hi-Vis Multi: 57% Aramid, 42% Poliestër, 1% Fibra Karboni Antistatike 260g
STANDARTET
EN ISO 11612 (A1, B1, C1, F1)
EN ISO 11611 Klasi 1 (A1)
EN 1149-5
EN ISO 20471 Klasi 3
RIS 3279 TOM Botimi 2 (vetem Portokalli)
PORTWEST
For over 117 years we’ve possessed an unrelenting ambition to produce the world’s most trusted and requested protective wear. Through the decades, we have continuously proven our dedication to quality, producing world beating safety garments, foot protection, hand protection and PPE, while pushing the boundaries in protection technologies. Technologies that make the workplace a safer place.
EN ISO 11612 Heat & Flame
This test uses standard methods and conditions to predict the performance of fabric/garments in the event of contact with heat or flames. Specific testing is listed below: Dimensional change, Limited flame spread (A1+A2), Convective heat (B) - 3 levels, Radiant heat (C) - 4 levels, Molten aluminium splash (D) – 3 levels, Molten iron splash (E) – 3 levels, Contact heat (F) – 3 levels (temperature 250 degrees Celsius)Details
EN ISO 11611 Welding & Allied
Standard specifies two classes with specific performance requirements. Class 1: is protection against less hazardous welding techniques and situations causing lower levels of spatter and radiant heat. Class 2: is protection against more hazardous welding techniques and situations causing higher levels of spatter and radiant heat.Details
EN 1149 Anti-Static (ATEX)
This standard specifies PPE Clothing used in explosive environments (i.e. ATEX) where there is a risk that the garments could create sparks (source of ignition), which in turn could ignite explosive materials. Anti-Static garments marked EN 1149-5 are intended to be worn in Atex zones 1, 2, 20, 21 and 22. In oxygen enriched atmospheres or in zone 0, the Anti-Static garments should not be used without first being approved by a qualified Safety Engineer, as wear and tear can affect the protection of the garment and it is crucial that they are worn the correct way in these environments.Details
Inherent FR Garments
Inherent fabric guarantees lifelong protection for the wearer. The FR properties lie in the molecular structure of the fibres and cannot be washed or worn out. PROS: excellent heat and ARC protection, excellent colour fastness even after numerous washings hence good cost in use performance, typically lighter weight solutions with excellent comfort levels, typically used in less dirty environments where the corporate look is also important. CONS: limited protection against molten metal splash, typically a more expensive fabric than FR treated. The most common FR fibers used in protective clothing are modacrylics and aramidsDetails
Share this product:
| Garment Size | S - Small or M - Medium or L - Large or XL - XLarge or XXL - XXLarge or XXXL - 3XLARGE or 4XL - 4XLarge or 5XL - 5XLarge |
| Color | ORR Orange |
Once the user has seen at least one product this snippet will be visible.