FR09 Огноотпорна анти-статик Balaclava
Оваа отпорна на пламен Balaclava ќе го задржи својот облик носење по носењето. Високата содржина на памук дава максимална удобност на кожата. Ткаенината е инхерентно анти-статичка и обезбедува заштита ARC2 против термички опасности од електричен лак.
Карактеристики
Инхерентно пламен отпорни квалитети нема да се намали
заштита од зрачење, конвективни и контакт на топлина
Висока содржина на памук
Антистатички
Дизајниран за удобност
Супер меко за супериорна удобност на корисникот и супер еластично за да се намали замор на рацете
Сертифицирано од европската комисија
CE-CAT III
Материјали:
Ткаенина на внатрешноста: Modaflame плетка 60% Modacrylic, 39% памук, 1% јаглеродно влакно, 300g
Стандарди
EN ISO 11612 (A1, B1, C1, F1)
EN 1149-5
ASTM F1959/F1959M-12 (ATPV 16 CAL/CM² (HAF 86%))
PORTWEST
For over 117 years we’ve possessed an unrelenting ambition to produce the world’s most trusted and requested protective wear. Through the decades, we have continuously proven our dedication to quality, producing world beating safety garments, foot protection, hand protection and PPE, while pushing the boundaries in protection technologies. Technologies that make the workplace a safer place.
EN ISO 11612 Heat & Flame
This test uses standard methods and conditions to predict the performance of fabric/garments in the event of contact with heat or flames. Specific testing is listed below: Dimensional change, Limited flame spread (A1+A2), Convective heat (B) - 3 levels, Radiant heat (C) - 4 levels, Molten aluminium splash (D) – 3 levels, Molten iron splash (E) – 3 levels, Contact heat (F) – 3 levels (temperature 250 degrees Celsius)Details
EN 1149 Anti-Static (ATEX)
This standard specifies PPE Clothing used in explosive environments (i.e. ATEX) where there is a risk that the garments could create sparks (source of ignition), which in turn could ignite explosive materials. Anti-Static garments marked EN 1149-5 are intended to be worn in Atex zones 1, 2, 20, 21 and 22. In oxygen enriched atmospheres or in zone 0, the Anti-Static garments should not be used without first being approved by a qualified Safety Engineer, as wear and tear can affect the protection of the garment and it is crucial that they are worn the correct way in these environments.Details
Inherent FR Garments
Inherent fabric guarantees lifelong protection for the wearer. The FR properties lie in the molecular structure of the fibres and cannot be washed or worn out. PROS: excellent heat and ARC protection, excellent colour fastness even after numerous washings hence good cost in use performance, typically lighter weight solutions with excellent comfort levels, typically used in less dirty environments where the corporate look is also important. CONS: limited protection against molten metal splash, typically a more expensive fabric than FR treated. The most common FR fibers used in protective clothing are modacrylics and aramidsDetails
Споделете :
| Боја | NAR Тегет |
Once the user has seen at least one product this snippet will be visible.