TRL ψηλός Κατά μήκος κεφαλή κοπής 1 ή 3 διεισδύσεις

STANDARD(S) : For any cables except H07RNF.
USE : TRL heads are used with PINTEL4/CIR10 or PRG3/CIR20 tools to perform a longitudinal cut on cable outer sheath.
SPECIFICATIONS : 1 penetration head on request, precise the desired penetration.
ADVANTAGES : Interchangeable longitudinal head on CIR pliers.

RL/10-12-14 = Longitudinal cutting head 3 penetrations 1.0 / 1.2 / 1.4 mm
TRL/10-15-20 = Longitudinal cutting head 3 penetrations 1.0 / 1.5 / 2.0 mm
TRL/16-18-20 = Longitudinal cutting head 3 penetrations 1.6 / 1.8 / 2.0 mm
TRL/20-24-28 = Longitudinal cutting head 3 penetrations 2.0 / 2.4 / 2.8 mm
TRL/24-28-32 = Longitudinal cutting head 3 penetrations 2.4 / 2.8 / 3.2 mm
TRL/26-28-32 = Longitudinal cutting head 3 penetrations 2.6 / 2.8 / 3.2 mm
TRL10 = Longitudinal cutting head 1 penetration 1.0 mm
TRL14 = Longitudinal cutting head 1 penetration 1.4 mm
TRL20 = Longitudinal cutting head 1 penetration 2.0 mm
TRL25 = Longitudinal cutting head 1 penetration 2.5 mm
TRL30 = Longitudinal cutting head 1 penetration 3.0 mm
TRL40 = Longitudinal cutting head 1 penetration 4.0 mm