TAPISNIT Nitrile mat

USE : To protect tools - keep items clean at the trench's edge.

SPECIFICATIONS :
Elastomeric material : nitrile.
Density : 1.35 ± 0.1 kg/dm3
DIDC hardness : 65 ± 7 degrees
Breaking strength (Rr) : ≥ 5 Mpa
Elongation at break (Ar) : ≥ 200 %
Operating temperature : -20 / +100°C
Conditions of use (only for TAPISNIT.140.300) : according to the requirements of the ERDF Engineering department ("Direction Réseau - Département Fiabilité Ingénierie d’ERDF"), if working in the vicinity of an accessory :
- Either cover the accessory in the trench with 5 cm of sand, then place the nitrile rubber mat over it all,
- Or position 2 nitrile mats overlapping over the accessory (1 metre overlap of the two mats).

TAPISPICOUP = Dimensions (mm): 700 x 1000
TAPISNIT.140.300 = Dimensions (mm): 1400 x 3000