FHR 005 FireFighter Boots, smooth leather
Special footwear, delivering safety in extreme environments, including fire-fighting, rescue and containment operations.
Complies with the most stringent protection standards in accordance with Regulation (EU) 2016/425
Maximum comfort
IBISAFE® — Kevlar® sole insert instead of a steel insert, ensuring the sole remains non-pierceable, flexible and elastic with excellent thermal insulation properties. Its use significantly reduces the weight of the footwear.
NITRIL® — sole made of black vulcanised rubber, protects against frost and high temperatures, ergonomic, anti-static, anti-slip, acid and oil resistant, easy to keep clean.
JADO® — a micro-ventilation system used in the upper of the boot (at the cuff), ensures good thermal insulation at both high and low temperatures.
Rear articulation zone.
Extra ankle protection.
Leather quick pull-on straps.
Lining around the ankle.
Soft cuff in the upper part of the boot.
Anatomic tongue.
Safety in extreme conditions
Third heat insulation level HI3 (contact heat resistance 40 minutes at 250°C).
Steel toe cap with a rubber abrasion resistant edge, 200 J impact resistance and 1500 N penetration force.
Made out of grain embossed hydrophobic leather (models 005 PL and 006 PL) or smooth leather (models 005 and 006), specially treated, heat-resistant and water-resistant (for 180 minutes).
3M® non-flammable reflective tape ensures excellent use visibility.
NOMEX® non-flammable thread seams.
Hook-free lacing system to prevent accidental catching (model 006).
Standards:
EN ISO 15090:2012 Class I, Design D, F2A HI3 CI SR
EN ISO 20345:2022 S7L HI CI SC HRO FO LG SR
EN 15090:2012
Footwear for firefighters. Three types of footwear for use by firefighters for general purpose rescue (F1), fire rescue (F2), hazardous materials emergencies (F3). Type 1 (F1): Forestry fire intervention: Toe cap & Perforation resistant plate (P) is optional, Can be class I and Class II (rubber or polymers). Chemical resistance is optional, can comply only if the boot is class II (polymeric materials) Heat resistance at least HI1. Type 2 (F2): Structural fire intervention: Toe cap protection & Perforation resistant plate. Can be class I and Class II. Chemical resistance is optional, can comply only if the boot is class II (polymeric materials). Heat resistance at least HI2 Type 3 (F3): Structural fire intervention with chemical risk: Toe cap protection & Perforation resistant plate. Chemical resistance Can be only Class II (polymeric materials). Heat resistance at least HI2. The fire intervention safety boots can have optionally: CI (outsoles with Cold Insulation). M (Metatarsal protection only if toe cap protection is present). AN (Ankle Protection). CR (Cut Resistance).Details
Share this product:
| Footwear size | 37 or 38 or 39 or 40 or 41 or 42 or 43 or 44 or 45 or 46 or 47 or 48 or 49 or 50 |
Once the user has seen at least one product this snippet will be visible.