GERHARD FR Anti-static 3-in-1 Multinorm Jacket
Εξωτερικό μπουφάν:
• Λειτουργία 3 σε 1 με αφαιρούμενο εσωτερικό μπουφάν fleece
• αντιανεμικό και αδιάβροχο, αναπνεύσιμο
• ανθεκτικό στην τριβή και στο σκίσιμο
• κολλημένες ραφές
• επιβραδυντικό φλόγας σύμφωνα με το EN 14116
• αντιστατικό σύμφωνα με το EN 1149-5
• καλή θερμομόνωση σύμφωνα με το EN 14058
• Ανακλαστικό υλικό LOXY®
• στιβαρό μπροστινό φερμουάρ 2 κατευθύνσεων που καλύπτεται από μπροστινό πάνελ με κουμπιά πίεσης
• τα καλυμμένα κουμπιά αποτρέπουν τις γρατσουνιές
• μοντέρνα και εργονομική εφαρμογή
• ελαστικό στρίφωμα μανίκι, ρυθμιζόμενο με velcro
• εκτεταμένη πλάτη
• πινακίδα πολλαπλών κανόνων στο επάνω αριστερό μανίκι
• απλοποιημένη επωνυμία χάρη στο φερμουάρ εξυπηρέτησης στην επένδυση
τσέπες:
• 1 τσέπη Napoleon με φερμουάρ
• 2 τσέπες στους γοφούς με φερμουάρ
• 1 εσωτερική τσέπη με velcro
Το εσωτερικό μπουφάν fleece μπορεί να φορεθεί ξεχωριστά:
• αντιστατικό σύμφωνα με το EN 1149-5
• ελαστικό στρίφωμα μανίκι
τσέπες:
• 2 τσέπες στους γοφούς με velcro
Κανόνες εξωτερικό μπουφάν: EN ISO 20471, class 3, EN 343 class 3/3
EN 1149-5, EN 14058 κλάση 1/3/2
EN ISO 14116 index 1, EN 13034 type PB (6), EN ISO 13688
πρότυπο εσωτερικό μπουφάν:
EN 14116, ευρετήριο 1, EN ISO 13688
Σύνθεση υφάσματος:
εξωτερικό μπουφάν:
Ύφασμα κελύφους: 98% πολυεστέρας, 2% άνθρακας
φόδρα: 100% βαμβάκι
χρώμα: υψηλής ορατότητας κίτρινο/ναυτικό
εσωτερικό μπουφάν:
Ύφασμα κελύφους: 100% πολυεστέρας
HELMUT FELDTMANN GmbH
We are more than just a work safety equipment importer. Company Helmut Feldtmann GmbH is owner-managed, independent, and influenced by the Hanseatic tradition. For three generations and over 80 years, the protection of people's health has been at the center of our actions. We are one of the leading providers of personal protective equipment, hoses, operational supplies, big bags, and cargo securing solutions. From entry-level prices to our premium trade brands, Elysee and Opti-Flex, we offer the full spectrum, complemented by numerous branded items.
EN ISO 20471 Hi-Vis Class 3
EN ISO 20471 is divided into three classes, the requirement for the area consisting of reflectors and fluorescent materials – that determines which class you need to choose. Minimum areas of visible material in m². Class 3: Reflective Tape = 0.20m², Fluorescent material = 0.80m². Class 2: Reflective Tape = 0.13m², Fluorescent material = 0.50m². Class 1: Reflective Tape = 0.10m², Fluorescent material = 0.14m². The highest class is class 3. There are two ways to attain class 3. Either choose an EN ISO 20471 product that is rated class 3 on its own (e.g. a jacket) or choose two products that together are class 3 certified.Details
EN ISO 14116 Limited Flame Spread
Protective clothing complying with this standard is intended to protect workers against occasional and brief contact with small igniting flames in circumstances where there is no significant flame hazard and without the presence of another type of heat. Three different categories for flame spread, Index 1, 2 and 3. Index 1: garments should not be worn next to the skin. They must be worn over Index 2 or 3 garments. Index 2 or 3 garments can be worn next to the skin.Details
EN 1149 Anti-Static (ATEX)
This standard specifies PPE Clothing used in explosive environments (i.e. ATEX) where there is a risk that the garments could create sparks (source of ignition), which in turn could ignite explosive materials. Anti-Static garments marked EN 1149-5 are intended to be worn in Atex zones 1, 2, 20, 21 and 22. In oxygen enriched atmospheres or in zone 0, the Anti-Static garments should not be used without first being approved by a qualified Safety Engineer, as wear and tear can affect the protection of the garment and it is crucial that they are worn the correct way in these environments.Details
EN 13034 Liquid Chemicals
Standard for protection of a potential exposure to a light spray, liquid aerosols or low pressure, low volume splashes when complete liquid permeation barrier (at a molecular level) is not required. The following chemical groups/chemicals can be tested: H2SO4 30% (Sulphuric acid), NaOH 10% (Sodium hydroxide also called lye and caustic soda), O-xylene, Butanol. The result is given in scale 1-3 where the maximum value is 3. To pass the test and be able to use the EN 13034 symbol in the CE-marking, at least one chemical shall obtain level 3 for liquid repellency and at least one chemical shall obtain level 2 for resistance to penetration.Details
Inherent FR Garments
Inherent fabric guarantees lifelong protection for the wearer. The FR properties lie in the molecular structure of the fibres and cannot be washed or worn out. PROS: excellent heat and ARC protection, excellent colour fastness even after numerous washings hence good cost in use performance, typically lighter weight solutions with excellent comfort levels, typically used in less dirty environments where the corporate look is also important. CONS: limited protection against molten metal splash, typically a more expensive fabric than FR treated. The most common FR fibers used in protective clothing are modacrylics and aramidsDetails
Share this product:
| Μέγεθος ρούχων | S - Small or M - Medium or L - Large or XL - XLarge or XXL - XXLarge or XXXL - 3XLARGE |
Once the user has seen at least one product this snippet will be visible.