PS89 Kapelë Mbrojtese Ultra Light
Kapelë Industriale Mbrojtese me një guaskë plastike ultra të lehtë. Përfshin 4 parzmore të formuara me një shirit djerse dhe togze për madhësi të rregullueshme (50-60cm). Me vrima anësore për rrjedhje shtesë të ajrit. Lehtë për tu pastruar dhe me peshë ultra të lehtë dhe e rehatshme.
Veçoritë
Peshe e Lehte
Harnes me 4 pika kapese me amortizim
Shkume e bute dhe shiriti i ballit i perfshire
Togez e rregullueshme për tu vendosur me lehte
Certifikim CE
Ambalazhimi i produktit është i pershatshem për tu reklamuar ne dyqan
Materiali: HDPE, LDPE, HDPE
STANDARTET
EN 812
PORTWEST
For over 117 years we’ve possessed an unrelenting ambition to produce the world’s most trusted and requested protective wear. Through the decades, we have continuously proven our dedication to quality, producing world beating safety garments, foot protection, hand protection and PPE, while pushing the boundaries in protection technologies. Technologies that make the workplace a safer place.
EN 397 Industrial Safety Helmets
MANDATORY tests: IMPACT: Energy spread to the head form must not exceed 5 kN after the fall of an object of 5 kg at 1m high, performed at room temperature: +50°C and at -10°C. PENETRATION: The tip of the test mass used (3 kg from 1m height) must not come into contact with the skull, performed at room temperature: +50°C and at -10°C. FLAMMABILITY: The helmet is exposed to a flame, and it must not burn with flame emission more than 5 seconds after removal of the flame. OPTIONAL tests: EXTREME TEMPERATURE: testing impact and penetration are performed at +150°C, at -20°C or -30 °C temperatures. ELECTRICAL (440V A.C): Protects against a short accidental contact with electric leads under voltage up to 440 Vac. LATERAL DEFORMATION (LD): Protects against lateral compression. The maximum deformation of the helmet should be ≤40 mm. MOLTEN METAL (MM): The helmet is not deformed or penetrated by splashes of molten metal.Details
EN812 Industrial Bump Caps
Bump caps for industry are intended to protect the user against the effects of head impact against a hard and stationary object, the severity of which is such as to cause a cut or other superficial injuries. To protect from the effects of falling or throwing objects or from suspended or moving loads it is required Helmets with EN 397. The requirements are as follows: IMPACT resistance: ≤15.0 kN with impact energy 12.5 J (a mass of 5 kg falling from a height of 25 centimetres). PENETRATION resistance: 2.5 J (a mass of 0.5 kg falling from a height of 50 centimetres). FLAME resistance (F): no damage after exposure to the flame for 5 seconds. OPTIONAL: Electrical properties (440 V AC): leakage current ≤1.2 mA at a voltage of 1,200 V AC.Details
Share this product:
| Color | ORR Orange or YER Yellow or RBR Royal Blue or WHR White |
Once the user has seen at least one product this snippet will be visible.