![ST44 BizTex Microporous Shoe Cover Type PB[6]](/web/image/product.product/10391/image_1024/%5BST44WHR%5D%20ST44%20BizTex%20Microporous%20Shoe%20Cover%20Type%20PB%5B6%5D?unique=dc7d775)
ST44 BizTex Microporous Shoe Cover Type PB[6]
These protective overshoes are designed for use in all work environments where shoes or floors need protecting. Elastic finish to top of shoe ensures a secure fit. This fabric conforms to EN14126-Biological Protection and EN1149-1 Anti-Static Protection.
Features:
- Disposable boot covers for superior protection against cross contamination
- Elasticated cuffs for a secure fit
- Unit of sale is 200 pairs
- CE-CAT III
- CE certified
- This product is sold in pairs
- This product is sold in carton qty's
Fabric Information:
Shell Fabric: BizTex™ Micro, 60g
Standards:
EN 13034 Type PB [6]
EN 1149-5
PORTWEST
For over 117 years we’ve possessed an unrelenting ambition to produce the world’s most trusted and requested protective wear. Through the decades, we have continuously proven our dedication to quality, producing world beating safety garments, foot protection, hand protection and PPE, while pushing the boundaries in protection technologies. Technologies that make the workplace a safer place.
EN 1149 Anti-Static (ATEX)
This standard specifies PPE Clothing used in explosive environments (i.e. ATEX) where there is a risk that the garments could create sparks (source of ignition), which in turn could ignite explosive materials. Anti-Static garments marked EN 1149-5 are intended to be worn in Atex zones 1, 2, 20, 21 and 22. In oxygen enriched atmospheres or in zone 0, the Anti-Static garments should not be used without first being approved by a qualified Safety Engineer, as wear and tear can affect the protection of the garment and it is crucial that they are worn the correct way in these environments.Details
EN 13034 Liquid Chemicals
Standard for protection of a potential exposure to a light spray, liquid aerosols or low pressure, low volume splashes when complete liquid permeation barrier (at a molecular level) is not required. The following chemical groups/chemicals can be tested: H2SO4 30% (Sulphuric acid), NaOH 10% (Sodium hydroxide also called lye and caustic soda), O-xylene, Butanol. The result is given in scale 1-3 where the maximum value is 3. To pass the test and be able to use the EN 13034 symbol in the CE-marking, at least one chemical shall obtain level 3 for liquid repellency and at least one chemical shall obtain level 2 for resistance to penetration.Details
Share this product:
![ST44 BizTex Microporous Shoe Cover Type PB[6]](/web/image/product.template/3874/image_128)
| Color | WHR White |
Once the user has seen at least one product this snippet will be visible.