ST40 BizTex Microporous Coverall Type 5/6
The spacious design guarantees a good fit and will not limit job performance. Made up of millions of polyethylene fibres that are spunbonded giving an excellent barrier, toughness and strength in all directions. Elasticated hood, ankles, cuffs and waist, along with a two-way front zip and sealable front flap.
Features:
- Leading design made from microporous material
- Excellent liquid and particulate barrier protection
- Low linting construction for minimal contamination
- Anti-static
- Two-way front zip and sealable front flap
- Elasticated hood, ankles, cuffs and waist
- CE-CAT III
- Two-way zip for quick and easy access
- Ergonomically shaped hood for a perfect fit
- This product is sold in carton qty's
- Retail bag which aids presentation for retail sales
- CE certified
Fabric Information:
Shell Fabric: BizTex™ Micro, 60g
Standards:
EN ISO 13982 Type 5B
EN 13034 Type 6B
EN 1073-2
EN 1149-5
EN 14126
ANSI/ISEA 101
PORTWEST
For over 117 years we’ve possessed an unrelenting ambition to produce the world’s most trusted and requested protective wear. Through the decades, we have continuously proven our dedication to quality, producing world beating safety garments, foot protection, hand protection and PPE, while pushing the boundaries in protection technologies. Technologies that make the workplace a safer place.
EN 1149 Anti-Static (ATEX)
This standard specifies PPE Clothing used in explosive environments (i.e. ATEX) where there is a risk that the garments could create sparks (source of ignition), which in turn could ignite explosive materials. Anti-Static garments marked EN 1149-5 are intended to be worn in Atex zones 1, 2, 20, 21 and 22. In oxygen enriched atmospheres or in zone 0, the Anti-Static garments should not be used without first being approved by a qualified Safety Engineer, as wear and tear can affect the protection of the garment and it is crucial that they are worn the correct way in these environments.Details
EN 13034 Liquid Chemicals
Standard for protection of a potential exposure to a light spray, liquid aerosols or low pressure, low volume splashes when complete liquid permeation barrier (at a molecular level) is not required. The following chemical groups/chemicals can be tested: H2SO4 30% (Sulphuric acid), NaOH 10% (Sodium hydroxide also called lye and caustic soda), O-xylene, Butanol. The result is given in scale 1-3 where the maximum value is 3. To pass the test and be able to use the EN 13034 symbol in the CE-marking, at least one chemical shall obtain level 3 for liquid repellency and at least one chemical shall obtain level 2 for resistance to penetration.Details
Share this product:
| Garment Size | S - Small or M - Medium or L - Large or XL - XLarge or XXL - XXLarge or XXXL - 3XLARGE |
| Color | WHR White |
Once the user has seen at least one product this snippet will be visible.