PICOUP-2E Hydraulic Spiking-Cutting cable set for checking the absence of voltage

USE : Spiking a cable to check and ensure the absence of voltage on LV and MV underground cables before cutting them.
LV to HN 33 S 32 and S 33 up to 3x240 mm² alu + 1x95 mm² alu .
MV to NFC 33320 and C33223 : 3x240 mm² and 1x630 mm² (single phase).
Old cables according to NFC 33.100.
The tool limits its work to create a single phase fault on a multiphase (and or a single phase) cable
thereby provoking the immediate reaction of the protections ( limiters, breaker, etc ) before said fault is converted into a two-phase or a three-phase fault .
After this spiking operation, the so disconnected cable may then be safely cut.

SPECIFICATIONS :
• Hydraulic cable spiking-cutting head composed of :
- a hydraulic jack,
- a crank for manual approach to position the tool on the cable,
- a treated steel pair of cutting blades, one of them bears the steel pike,
- a cradle for centring the cable,
- a blade guide,
- 2 gauges to check the pike
- Cutting capacity : Ø 95 mm
- Dimensions : 540 x 210 x 330 mm
- Weight : 13,5 kg

• Specialized electro-hydraulic autonomous pump unit composed of:
- a 700 bars nominal pressure electro-hydraulic pump driven by a 12 V. motor .
- a control casing homing the battery .
- high pressure flexible hoses ( non-conductive orange 1 m.long + armoured black 2 m. long ).
- a valve in case of emergency use of a foot pump .
- Hydraulic fluid TOTAL EQUIVIS ZS 15
- Reservoir capacity : 0.7 l .
Dimensions : 260 x 130 x 280 mm.
Weight : 5,1 kg.

Delivered in case containing all necessary parts for the checking absence of voltage operation:
- The spiking-cutting head with flexible braid and earthing rod.
- The electro-hydraulic pump.
- Two 12 V. batteries and associated one-hour fast charger .
- Wrench to install an other steel pike and to disconnect the earthing flexible braid.
- A gauge to check the shape of the pike
- Two straps each 2m. long for securing the tool in tunnels and trenches.
- Protective undercarpet 0.7 m x 1 m.

Dimensions : 850 x 300 x 350 MM
Total weight : 40 kg.

ADVANTAGES :
Spiking and cutting in one operation.
Single phase fault 1000A/1s.

PENTA ESP (Electrical Safety Products)

We are PENTA 🚀 👷🏽‍♀️ Multinational industrial leader, pioneer and expert manufacturer of electrical safety solutions, committed to ensuring your safety at every intervention! 🤝 We are the essential partner for linemen, maintenance technicians and electricians working on power generation, transmission and distribution networks all over the world, and in 9 other areas of activity. With over 1200 employees in 18 subsidiaries worldwide, PENTA adapts its products to all electrical standards and regulations of each country. You will find our electrical safety solutions under different brands.

Share this product: