MTAG MV Voltage detector 1 - 69 kV

STANDARD(S) : IEC 61243-1 VOLTAGE DETECTORS CAPACITIVE TYPE TO BE USED FOR VOLTAGES EXCEEDING 1 kV A.C. CE: Compliance with European directives.

USE : These voltage detectors are designed for “proving dead”, making sure that nominal voltage is actually absent on a circuit in an HV distribution system between 1 kV and 69 kV (no-voltage verification):
• The device will detect any nominal voltage on overhead lines and stations.
• It will avoid detecting most induced voltages in order to allow grounding operations.

SPECIFICATIONS :
AC voltage range possible choice from 1 - 4 kV to 69 kV
Network frequency: 50 and 60 Hz
• Permanent standby status with automatic wake up function
• The presence of voltage within the calibrated range or above is indicated by a RED light and abeeping sound
• Self test OK the OK status (ready for use) of the device is indicated by a GREEN light
• The self test checks all the circuits, the reference detection level and the battery voltage
• The “ready for use” state is indicated by the green indication for 15 minutes
• A low battery level is indicated by an ORANGE light
• Designed for outdoor and indoor use
• Operating temperature : -25° C to 55°C
• Humidity 96 max
• Power supply voltage 9 V alkaline cell IEC 6 LR 61
• Accepts the use of rechargeable battery with identical supply voltage
• Yellow polycarbonate housing
• Dimensions Ø 59 mm, L 280 mm without the contact electrode
• Net weight 0.390 kg with stick adaptor
• Operating manual with a choice of languages, depending on the package

ADVANTAGES :
Optimised indication that can be understood clearly in all working conditions:

• The visual indication is visible in all usual working environments, in sunlight or fog, with a wide angle of visibility and from the side thanks to an optic ring.
• The 100 dB sound signal is designed to remains audible even in traffic or strong wind, thanks to its acoustic “horn”.
Direct access to the battery and sealed electronics compartment. When the battery is replaced, this design prevents the following:
• accidental interchange of housing or circuitry;
• damage to electronic circuits;
• humidity ingress into the device when the battery is replaced outdoors.

TABLE LEGEND : Other stick adaptors available on request. Metal case available on request.

MTAG0104FHUA = Voltage range: 1 - 4 kV , Frequency: 50 / 60 Hz , Housing colour : Yellow , Contact electrode: V56 , Packaging: Soft case with conductive lining for EMC protection , User's manual: Pack F
MTAG0310FHUA = Voltage range: 3 - 10 kV , Frequency: 50 / 60 Hz , Housing colour : Yellow , Contact electrode: V56 , Packaging: Soft case with conductive lining for EMC protection , User's manual: Pack F
MTAG1036FHUA = Voltage range: 10 - 36 kV , Frequency: 50 / 60 Hz , Housing colour : Yellow , Contact electrode: V56 , Packaging: Soft case with conductive lining for EMC protection , User's manual: Pack F
MTAG2069FHUA = Voltage range: 20 - 69 kV , Frequency: 50 / 60 Hz , Housing colour : Yellow , Contact electrode: V56 , Packaging: Soft case with conductive lining for EMC protection , User's manual: Pack F

PENTA ESP (Electrical Safety Products)

We are PENTA 🚀 👷🏽‍♀️ Multinational industrial leader, pioneer and expert manufacturer of electrical safety solutions, committed to ensuring your safety at every intervention! 🤝 We are the essential partner for linemen, maintenance technicians and electricians working on power generation, transmission and distribution networks all over the world, and in 9 other areas of activity. With over 1200 employees in 18 subsidiaries worldwide, PENTA adapts its products to all electrical standards and regulations of each country. You will find our electrical safety solutions under different brands.

Share this product: