80087-01 STELVIO Boots S3 HRO SRC
UPPER: Greased Nubuk Dakar Leather Hydro 1,8-2,0 mm
LINING: 3D Air circulation 320 gr.
TOE CAP: CTC- Composite Toe Cap
RESISTANCE TO PERFORATION: Zero(K) Perforation resistant
SOLE: PU-Rubber VIBRAM-HRO-SRC
STANDARDS: EN ISO 20345:2011 and comply with DGUV 112-191 and ONorm requirements.
Brand: SIXTON PEAK
Product range: ATLANTIDA
Sixton Peak® footwear uses superior quality full grain, nubuck and suede leather with breathability, naturalness and water repellency characteristics beyond the usual standards. Tanning done in Italy ensures a careful manufacturing process for our hides in the use of products that respect the environment and the end user. They are therefore ecological and hypoallergenic.
LINIING: 3D Air circulation 320 gr.
Sixton Peak® chooses the best materials. Technologically advanced fibers to ensure the bestBperformance even in the internal parts of the shoe, less visible but more important for the well-being of the foot. These special three-dimensional linings guarantee an unsurpassed breathability index, combined with a high physical resistance.
REMOVABLE INSOLE: BLOWFIT
The upper part in FLYFIT, directly in contact with the foot,means transpiration and comfort. Under the heel, a support in EVA keeps the shape and resistance over time, efficiently supporting the bodyweight.
TOE CAP: CTC- COMPOSITE TOE CAP
Toecap made of plastic, incredibly light and resistant to impact of over 200j, very high elastic coefficient, immediately regaining the original shape without entrapping the toes. Perfect thermal isolation. Not detected by metal detector.
MIDSOLE: Zero(K) Perforation resistant
Fabric, non-metallic insert. Puncture resistant more than 1100 N with zero perforation and maximum peak of 2000 N. It guarantees protection over the entire surface of the sole of the foot. Extremely flexible and comfortable.
SOLE: PU-RUBBER VIBRAM-HRO-SRC
Sole with anti-wear scaff cap. Outsole in VIBRAM rubber, resistant to 300° C by contact (HRO), to acids and oils. Design with self-cleaning outsole, with SRC Antislip standard.
ATLANTIDA MOVE SAFELY Atlantida is set up as hard-wearing footwear with quality production and high-level dynamics. Particularly suitable for building sites, heavy-duty carpentry and agriculture, where a comfortable, safe and hardwearing solution is required.
EN 20345 - S3Closed heel, Cleated sole, Toe Cap (Shock resistant to 200J), (P) Penetration Resistant Midsole (≥ 1100 N), (E) Heel Energy absorption (≥ 20 Joule), (FO) resistance to hydrocarbons, (A) Anti-Static (between 1x10 5 Ω and 1x10 9 Ω), (WRU) Water Resistant (> 60 mins - Absorbance < 30%)
EN 20345 SRC - Slip ResistantSlip Resistance Outsole Tested on ceramic tile with sodium lauryl sulphate (a diluted soap solution) & Tested on steel with glycerol
EN 20345 HRO - Heat resistant outsoleHeat-resistant footwear features an outsole which must be able to resist 300°C for 60 seconds. can be used in close proximity to hot surfaces such as freshly laid tarmac.
Share this product:
|Footwear size||38 or 39 or 40 or 41 or 42 or 43 or 44 or 45 or 46 or 47 or 48|
Once the user has seen at least one product this snippet will be visible.