30437-00 ORTISEI BOA Hdry® Boots S3 WR HRO HI SRC
UPPER: MicroFiber Suede + No ladder H.T. Fabric
LINING: 3D Air circulation 320 gr.
TOE CAP: Alu SXT 2.0 Toe cap
RESISTANCE TO PERFORATION: Textile resistant to 3.0 mm nail – X Method
SOLE: PU-Rubber VIBRAM®-FIRE&ICE
STANDARDS: EN ISO 20345:2011 and comply with DGUV 112-191 and ONorm requirements.
Brand: SIXTON PEAK
Product range: SCOUT
UPPER: MicroFiber Suede
The microfibers used in Sixton Peak® footwear are extremely soft, light, resistant are technical microfibers with a high technological and innovative content, made for the safety footwear sector. They are the result of studies and research that have made it possible to achieve a high level of resistance and eco-compatibility, with new performing finishes, synonymous with touch and pleasantness, softness and breathability, with an extremely comfortable effect.
HDRY® A WATERPROOF AND BREATHABLE BARRIER
Thanks to an innovative process of direct lamination of the upper, Sixton Peak® shoes exceed the normal waterproofing and durability standards. The waterproof and breathable membrane perfectly shuts off any potential entry point of the water into the shoe. It leaves no space between the upper and the membrane and does not allow water to penetrate inside the shoe. Therefore, no weight gain for the footwear that dries faster. It uses a hydrophilic type of membrane with very high breathability and sweat dispersion capacity (SATR A TM47:2019 test).
In traditional footwear with a "bootie" system, water can penetrate between the upper and the lining and even if it does not reach the foot, it stagnates, significantly limiting comfort and increasing the weight of the shoe.
In addition, the water condensation increases the feeling of cold and in case of low temperatures it can also freeze. Drying time becomes lengthy and difficult to complete making it difficult to use the shoe for long periods.
HDRY® technology solves these problems. The waterproof membrane is brought into contact with the upper avoiding the risk of water passing, leaving the inner linings intact and the space around the foot dry.
LINIING: 3D Air circulation 320 gr.
Sixton Peak® chooses the best materials. Technologically advanced fibers to ensure the bestBperformance even in the internal parts of the shoe, less visible but more important for the well-being of the foot. These special three-dimensional linings guarantee an unsurpassed breathability index, combined with a high physical resistance.
REMOVABLE INSOLE: QRS01
Anatomical breathable insole. Resistant fabric with recycled open-cell foam that absorbs shocks and reduces fatigue. Eliminates sweat with its high ability to evaporate it. Continuous comfort for months and months of use
TOE CAP: ALU SXT 2.0 TOE CAP
Result of the evolution of the latest technologies for aluminium. New toe cap with functional variable thicknesses. Ultra-light protection, keeping internal proportions comfortable.
MIDSOLE: Textile resistant to 3.0 mm nail – X Method
New non-metallic fabric inserts, reinforced with technical fibers more performing than the usual inserts and resistant to the finest nail as provided for by the next update of EN ISO 22568:2019.
SOLE: PU-RUBBER VIBRAM-FIRE&ICE
PU foam insole, light and comfortable. Modular overtoe to protect uppers. VIBRAM rubber tread with Fire & ICE mix for high performance in all temperatures. Self-cleaning design with special SRC grip.
Wearing a Sixton Peak® shoe means feeling comfortable, moving freely and safely, ensuring controlled foot support, stable and comfortable movement of muscles and joints. Just the attention to detail, the lengthy accumulated experience, care in sourcing the best raw materials allows us to create safety shoes of the highest quality. Sixton Peak® is the certainty of having chosen the best.
EN 20345 - S3Closed heel, Cleated sole, Toe Cap (Shock resistant to 200J), (P) Penetration Resistant Midsole (≥ 1100 N), (E) Heel Energy absorption (≥ 20 Joule), (FO) resistance to hydrocarbons, (A) Anti-Static (between 1x10 5 Ω and 1x10 9 Ω), (WRU) Water Resistant (> 60 mins - Absorbance < 30%)
EN 20345 SRC - Slip ResistantSlip Resistance Outsole Tested on ceramic tile with sodium lauryl sulphate (a diluted soap solution) & Tested on steel with glycerol
EN 20345 HI - Insulation against heatFor resistance against heat, footwear is tested for 30 minutes at 150°C.
EN 20345 HRO - Heat resistant outsoleHeat-resistant footwear features an outsole which must be able to resist 300°C for 60 seconds. can be used in close proximity to hot surfaces such as freshly laid tarmac.
EN 20345 WR - WaterproofIntegrated Waterproof Membrane into Footwear makes it Water Resistant which means it can be worn in outdoor environments exposed to sustained wet weather and not leak. Not to be confused with Water Repellent, which is a classification reached by all S3 Boots
Share this product:
|Footwear size||36 or 37 or 38 or 39 or 40 or 41 or 42 or 43 or 44 or 45 or 46 or 47 or 48 or 49 or 50|
Once the user has seen at least one product this snippet will be visible.