1010814 Firefighter Boots Marcus
Protective boots for Firefighters, made of waterproof genuine leather.
About product
The boots are made of waterproof genuine leather and stitched with fireproof threads. Inside the shoes have a lining of "breathable" material combined with a membrane and equipped with an insole that absorbs moisture.
Certified according to EN 15090:2012
Boots equipped with the BOA system, quick zipping boot for tight fit them on the leg.
The back of the boots has a handle-loop for easy putting on shoes.
On the shoes are reflective yellow.
On the outside of the boots and on the toe there are special lining of heat resistant rubber to protect the foot and toe of the boots.
An anatomical stitched insert in the back of the boots is provided for the convenience of the firefighter to work in a sitting position and when overcoming obstacles.
The shoes provide protection against the penetration of water not less than 60 minutes. The sole of the boots is nitrile heat resistant, resistant to high and low temperatures, has anti-static properties and is protected from slipping.
Shoes equipped with puncture-insert (footbed), the resistance of package materials midsole puncture between the reefs of at least 1200 N.
The toe shoes are equipped with a tray with rubber edges to protect the toes. Internal safe gap in the fore part at impact energy of 200 J, not less than 20 mm.
The stability of the toe part to the influence of ambient temperature at 200°C not less than 300 sec.
The stability of the toe part to the effects of heat flux of 5.0 kW/m not less than 300 sec.
Boots are made of the following sizes: 38-47 (36, 37, 48 and other sizes are made to order).
EN 15090:2012
Footwear for firefighters. Three types of footwear for use by firefighters for general purpose rescue (F1), fire rescue (F2), hazardous materials emergencies (F3). Type 1 (F1): Forestry fire intervention: Toe cap & Perforation resistant plate (P) is optional, Can be class I and Class II (rubber or polymers). Chemical resistance is optional, can comply only if the boot is class II (polymeric materials) Heat resistance at least HI1. Type 2 (F2): Structural fire intervention: Toe cap protection & Perforation resistant plate. Can be class I and Class II. Chemical resistance is optional, can comply only if the boot is class II (polymeric materials). Heat resistance at least HI2 Type 3 (F3): Structural fire intervention with chemical risk: Toe cap protection & Perforation resistant plate. Chemical resistance Can be only Class II (polymeric materials). Heat resistance at least HI2. The fire intervention safety boots can have optionally: CI (outsoles with Cold Insulation). M (Metatarsal protection only if toe cap protection is present). AN (Ankle Protection). CR (Cut Resistance).Details
Share this product:
| Footwear size | 38 or 39 or 40 or 41 or 42 or 43 or 44 or 45 or 46 or 47 |
Once the user has seen at least one product this snippet will be visible.