ST40 BizTex комбинезон со микро пори тип 5/6
Широкиот дизајн овозможува слобода во движењето и нема да ги ограничи Вашите работни перформанси. Изработен е од милиони полиетиленски влакна, споени со предење, овозможувајќи одлична цврстина и сила во сите правци. Има еластична лента на качулката, струкот и ракавите заедно со двосмерен патент со преклоп на предницата.
Карактеристики
микропори материјал
На течности и на честички бариера
Ниска linting површина за минимално загадување
Антистатички
Двонасочна ZIP во предниот и запечатува предната размавта
Ластик на качулката, ракавите, ногавиците и половината
CE-CAT III
Овој симбол укажува дека патентот може да биде отворен од горната и долната страна на облеката.
Ергономски обликувана качулка за убаво прилегање
Овој производ се продава во картонски количини
Малопродажна торба која помага при презентација во малопродажба
Сертифицирано од европската комисија
Материјали:
Ткаенина на внатрешноста: BizTex Micro, 60g
Стандарди
EN ISO 13982 ТИП 5B
EN 13034 ТИП 6B
EN 1073-2
EN 1149-5
EN 14126
ANSI/ISEA 101
PORTWEST
For over 117 years we’ve possessed an unrelenting ambition to produce the world’s most trusted and requested protective wear. Through the decades, we have continuously proven our dedication to quality, producing world beating safety garments, foot protection, hand protection and PPE, while pushing the boundaries in protection technologies. Technologies that make the workplace a safer place.
EN 1149 Anti-Static (ATEX)
This standard specifies PPE Clothing used in explosive environments (i.e. ATEX) where there is a risk that the garments could create sparks (source of ignition), which in turn could ignite explosive materials. Anti-Static garments marked EN 1149-5 are intended to be worn in Atex zones 1, 2, 20, 21 and 22. In oxygen enriched atmospheres or in zone 0, the Anti-Static garments should not be used without first being approved by a qualified Safety Engineer, as wear and tear can affect the protection of the garment and it is crucial that they are worn the correct way in these environments.Details
EN 13034 Liquid Chemicals
Standard for protection of a potential exposure to a light spray, liquid aerosols or low pressure, low volume splashes when complete liquid permeation barrier (at a molecular level) is not required. The following chemical groups/chemicals can be tested: H2SO4 30% (Sulphuric acid), NaOH 10% (Sodium hydroxide also called lye and caustic soda), O-xylene, Butanol. The result is given in scale 1-3 where the maximum value is 3. To pass the test and be able to use the EN 13034 symbol in the CE-marking, at least one chemical shall obtain level 3 for liquid repellency and at least one chemical shall obtain level 2 for resistance to penetration.Details
Споделете :
Големини - Облека | S - Small or M - Medium or L - Large or XL - XLarge or XXL - XXLarge or XXXL - 3XLARGE |
Боја | WHR Бела |
Once the user has seen at least one product this snippet will be visible.