PW97 Αναρρίχησης Κράνος

Εξαεριζόμενο κράνος, προσαρμοσμένο για εργασία σε ύψος. Υψηλής άνεσης κέλυφος Πολυαιθυλενίου, ιμάντας έξι σημείων, ρυθμιζόμενο κλείσιμο. Εξοπλισμένο με μπάντα για τον ιδρώτα και 4 σημεία ιμάντα στο πηγούνι(Υ στιλ)

Πρότυπα
Αερίζομενο Κράνος για να επιτρέπει τη ροή του αέρα να δροσίζει το κεφάλι του χρήστη
Πλαστική ζώνη ανάρτησης 6 σημείων για άνεση, ασφάλεια και εύκολο καθάρισμα
Ρυθμιζόμενο σύστημα μεγέθους με καστάνια τροχού
Περιλαμβάνεται υποσιαγώνιος ιμάντας
Περιλαμβάνεται μαλακή κορδέλα με αφρό για τον ιδρώτα
Ελαφρύ και άνετο
Έως 7 χρόνια διάρκεια ζωής από την ημερομηνία κατασκευής (εφ 'όσον δεν έχει υποστεί ζημιά)
CE Πιστοποιημένο

Υλικά:
Αναρρίχησης Κράνος, 358g

Πρότυπα
EN 397 (-30°C / +50°C)

14,34 € 14.34 EUR 14,34 €

1290,70 Lek


  • Χρώμα

Αυτός ο συνδυασμός δεν υπάρχει.

Add to Cart Buy Now

PORTWEST
PORTWEST

For over 117 years we’ve possessed an unrelenting ambition to produce the world’s most trusted and requested protective wear. Through the decades, we have continuously proven our dedication to quality, producing world beating safety garments, foot protection, hand protection and PPE, while pushing the boundaries in protection technologies. Technologies that make the workplace a safer place.


EN 397 Industrial Safety Helmets
MANDATORY tests: IMPACT: Energy spread to the head form must not exceed 5 kN after the fall of an object of 5 kg at 1m high, performed at room temperature: +50°C and at -10°C. PENETRATION: The tip of the test mass used (3 kg from 1m height) must not come into contact with the skull, performed at room temperature: +50°C and at -10°C. FLAMMABILITY: The helmet is exposed to a flame, and it must not burn with flame emission more than 5 seconds after removal of the flame. OPTIONAL tests: EXTREME TEMPERATURE: testing impact and penetration are performed at +150°C, at -20°C or -30 °C temperatures. ELECTRICAL (440V A.C): Protects against a short accidental contact with electric leads under voltage up to 440 Vac. LATERAL DEFORMATION (LD): Protects against lateral compression. The maximum deformation of the helmet should be ≤40 mm. MOLTEN METAL (MM): The helmet is not deformed or penetrated by splashes of molten metal.
Details

Best Value 
Fast Delivery
Quality Consistency

Share this product:
Χρώμα YER Κίτρινο or RBR Ποαιάλ Μπλέ or WHR Λευκό
This is a preview of the recently viewed products by the user.
Once the user has seen at least one product this snippet will be visible.
Recently viewed Products