PS52 Πλήρους Γείσου Κράνος Future
Πλήρους γείσου κράνος με ελαφρύ κέλυφος ΡΡ. Το ευρύ προφίλ του παρέχει επιπλέον προστασία από τον ήλιο, την αντανάκλαση, βροχή, συντρίμμια και μη-τοξικά πιτσιλίσματα. 4 σημείων Νάυλον κέλυφος με πόρπη για ρυθμιζόμενο μέγεθος (52-62εκ). Απαλού αφρού μπάντα για τον ιδρώτα συμπεριλαμβάνεται.
Χαρακτηριστικά
Πλήρης χείλος σκληρό καπέλο: ευρύ προφίλ που παρέχει επιπλέον προστασία από τον ήλιο, το έντονο φως, βροχή, τα συντρίμμια και μη τοξικές πιτσιλιές
Πλαστική ζώνη ανάρτησης 4 σημείων για άνεση, ασφάλεια και εύκολο καθάρισμα
Ρυθμιζόμενο σύστημα μεγέθους με καστάνια τροχού
Περιλαμβάνεται μαλακή κορδέλα με αφρό για τον ιδρώτα
Έως 7 χρόνια διάρκεια ζωής από την ημερομηνία κατασκευής (εφ 'όσον δεν έχει υποστεί ζημιά)
CE Πιστοποιημένο
Υλικά
Πολυπροπυλένιο - PP, Πολυ Αιθυλένιο, 465g
Πρότυπα
EN 397 (-10°C/+50°C)
ANSI/ISEA Z89.1 Τύπος I (Κλασή E)
PORTWEST
For over 117 years we’ve possessed an unrelenting ambition to produce the world’s most trusted and requested protective wear. Through the decades, we have continuously proven our dedication to quality, producing world beating safety garments, foot protection, hand protection and PPE, while pushing the boundaries in protection technologies. Technologies that make the workplace a safer place.
EN 397 Industrial Safety Helmets
MANDATORY tests: IMPACT: Energy spread to the head form must not exceed 5 kN after the fall of an object of 5 kg at 1m high, performed at room temperature: +50°C and at -10°C. PENETRATION: The tip of the test mass used (3 kg from 1m height) must not come into contact with the skull, performed at room temperature: +50°C and at -10°C. FLAMMABILITY: The helmet is exposed to a flame, and it must not burn with flame emission more than 5 seconds after removal of the flame. OPTIONAL tests: EXTREME TEMPERATURE: testing impact and penetration are performed at +150°C, at -20°C or -30 °C temperatures. ELECTRICAL (440V A.C): Protects against a short accidental contact with electric leads under voltage up to 440 Vac. LATERAL DEFORMATION (LD): Protects against lateral compression. The maximum deformation of the helmet should be ≤40 mm. MOLTEN METAL (MM): The helmet is not deformed or penetrated by splashes of molten metal.Details
Share this product:
Χρώμα | WHR Λευκό |
Once the user has seen at least one product this snippet will be visible.