FR47 Παντελόνι Φλόγας Sealtex
Αυτά τα παντελόνια προσφέρουν εξαιρετική προστασία από σκληρά στοιχεία, είναι αδιάβροχα και αντιανεμικά. Διαθέτουν ρυθμιζόμενα στριφώματα για να εξασφαλίσουν εύκολο on & off για το χρήστη.
Πρότυπα
Αδιάβροχο με συγκολλημένες ραφές για να αποφευχθεί η διείσδυση νερού
Ελαφρύ και άνετο
Ανθεκτικό και ελαστικό με καθαρό φινίρισμα
Μπατζάκια ρυθμιζόμενα με τρούκ για ασφαλή εφαρμογή
Κορδόνι με ρυθμιζόμενη μέση για άνετη εφαρμογή
Πλήρως ελαστικό ζωνάρι για απόλυτη άνεση του χρήστη
CE-CAT III
CE Πιστοποιημένο
Υλικά:
Σκληρό Ύφασμα: Sealtex Flame: 100% Πολυεστέρας, FR & Αντιστατικό, Επίστρωση PU, 240γρ
Πρότυπα
EN ISO 14116 Δείκτης 1
EN 1149-5
EN 13034 Τύπος 6
EN 343 Κλασή 3:1 X
PORTWEST
For over 117 years we’ve possessed an unrelenting ambition to produce the world’s most trusted and requested protective wear. Through the decades, we have continuously proven our dedication to quality, producing world beating safety garments, foot protection, hand protection and PPE, while pushing the boundaries in protection technologies. Technologies that make the workplace a safer place.
EN ISO 14116 Limited Flame Spread
Protective clothing complying with this standard is intended to protect workers against occasional and brief contact with small igniting flames in circumstances where there is no significant flame hazard and without the presence of another type of heat. Three different categories for flame spread, Index 1, 2 and 3. Index 1: garments should not be worn next to the skin. They must be worn over Index 2 or 3 garments. Index 2 or 3 garments can be worn next to the skin.Details
EN 1149 Anti-Static (ATEX)
This standard specifies PPE Clothing used in explosive environments (i.e. ATEX) where there is a risk that the garments could create sparks (source of ignition), which in turn could ignite explosive materials. Anti-Static garments marked EN 1149-5 are intended to be worn in Atex zones 1, 2, 20, 21 and 22. In oxygen enriched atmospheres or in zone 0, the Anti-Static garments should not be used without first being approved by a qualified Safety Engineer, as wear and tear can affect the protection of the garment and it is crucial that they are worn the correct way in these environments.Details
EN 13034 Liquid Chemicals
Standard for protection of a potential exposure to a light spray, liquid aerosols or low pressure, low volume splashes when complete liquid permeation barrier (at a molecular level) is not required. The following chemical groups/chemicals can be tested: H2SO4 30% (Sulphuric acid), NaOH 10% (Sodium hydroxide also called lye and caustic soda), O-xylene, Butanol. The result is given in scale 1-3 where the maximum value is 3. To pass the test and be able to use the EN 13034 symbol in the CE-marking, at least one chemical shall obtain level 3 for liquid repellency and at least one chemical shall obtain level 2 for resistance to penetration.Details
Treated FR Garments
FR treated fabrics are based on cotton, blended with polyester, para-aramid or polyamide. These fabrics get their FR property from the chemical treatment that is applied to the fabric. This chemical treatment is executed in such a way that it fully penetrates the fiber and as such is bonded throughout the entire fabric. As a result of this treatment, the fabric becomes flame retardant and keeps this property during the lifetime of the garment. PROS: very good protection against molten metal, good protection against heat and ARC, relatively cheap, good value for money in dirty environments where expected lifespan is not very long. CONS: wash fastness is typically not very good (pale look after several washes), to achieve similar FR properties as inherent FR the fabrics typically become a bit heavier and therefore tend to be a bit less comfortable.Details
Share this product:
| Garment Size | S - Small or M - Medium or L - Large or XL - XLarge or XXL - XXLarge or XXXL - 3XLARGE |
| Χρώμα | NAR Ναυτικό μπλέ |
Once the user has seen at least one product this snippet will be visible.