B01200 ISOTEC Γαλότσα Πυροσβέστη S5 CI HRO FO SRC F3A, Class 3

Μια μπότα ασφαλείας ανθεκτική στη θερμότητα και τη φλόγα σύμφωνα με το πρότυπο EN 15090 HI3 F3A για τις μπότες πυρκαγιάς για αντοχή στη φλόγα, ακτινοβολούμενη θερμότητα (20kW/m2) και θερμομόνωση της σόλας (250°C για 40 λεπτά). Αυτές οι μπότες είναι σχεδιασμένες για χρήση σε περιοχές όπου υπάρχει κίνδυνος σπινθήρων από συγκόλληση ή λείανση ή για πυρόσβεση σε κοντινή απόσταση.

ΧΑΡΑΚΤΗΡΙΣΤΙΚΑ ΠΡΟΪΟΝΤΟΣ
Χημικά ανθεκτική μπότα πιστοποιημένη κατά EN 13832-3:2018 (υποδήματα που προστατεύουν από χημικά)
Συμμορφώνεται με το πρότυπο EN 15090:2012 F3A Fire fighter boot standard
Θερμομόνωση της σόλας EN 15090:2012 (HI3): Η σόλα αντέχει 40 λεπτά στους 250°C με αύξηση της εσωτερικής θερμοκρασίας μικρότερη από 21°C μετά από 10 λεπτά
Ενσωματωμένο κάλυμμα δακτύλου από χάλυβα 200 Joule με εποξική επίστρωση και ενδιάμεση σόλα από ανοξείδωτο χάλυβα ανθεκτική στη διείσδυση
Ανθεκτική στη θερμότητα σόλα EN 20345:2011 HRO, 60 δευτερόλεπτα στους 300°C
Ψυχρή μόνωση κατά EN ISO 20345:2011 CI
Προαιρετική θερμική επένδυση
Σόλα ανθεκτική σε καύσιμα και λάδια
Βουλκανισμένη σόλα από καουτσούκ για βελτιωμένη αντοχή στην ολίσθηση - 30% καλύτερη από μια συμβατική σόλα για μπότες ασφαλείας
Ανθεκτική, ανθεκτική στην κοπή σόλα από βουλκανισμένο καουτσούκ, παρατείνει σημαντικά τη διάρκεια ζωής, ακόμη και σε σκληρό έδαφος
Καθαρισμένη εξωτερική σόλα για μέγιστη πρόσφυση σε υγρές και λιπαρές συνθήκες (SRC)
Σύστημα σήραγγας απορρόφησης ενέργειας στη φτέρνα κατά EN 20345:2011 E
Πιστοποιημένο σύμφωνα με την Οδηγία ναυτιλιακού εξοπλισμού
Εργονομική σόλα με αντικραδασμική προστασία (αφαιρούμενη και πλένεται στο πλυντήριο) για μεγαλύτερη άνεση
Απρόσκοπτη κατασκευή
Λυχνία έναρξης
Ρυθμιζόμενο ύψος
Πλεκτή νάιλον επένδυση
Σήμανση CE στον άξονα με ημερομηνία και έτος κατασκευής
Συμβατό με το REACH
Πλένεται στο πλυντήριο έως και 40°C
Διάρκεια ζωής πάνω από 10 χρόνια

ΠΙΣΤΟΠΟΙΗΣΗ
ΥΠΟΔΗΜΑΤΑ ΧΗΜΙΚΗΣ ΠΡΟΣΤΑΣΙΑΣ
EN 13832-3:2018 K,N,Q

ΤΑ ΜΕΣΑ ΑΤΟΜΙΚΗΣ ΠΡΟΣΤΑΣΙΑΣ
Κανονισμός ΜΑΠ (ΕΕ) 2016/425

ΥΠΟΔΗΜΑΤΑ ΑΣΦΑΛΕΙΑΣ
EN ISO 20345:2011 - S5 CI HRO FO SRC

ΥΠΟΔΗΜΑΤΑ ΓΙΑ ΠΥΡΟΣΒΕΣΤΕΣ
EN 15090:2012 Τύπος F3A

ΟΔΗΓΙΑ ΝΑΥΤΙΛΙΑΚΟΥ ΕΞΟΠΛΙΣΜΟΥ
2014/90/EU - MED/3.4 - Fire-Fighter’s Outfit: Boots

ΛΗΨΕΙΣ
Αρχείο PDF iconISOTEC Φύλλο πωλήσεων.pdf
https://www.workmasterboots.com/download_file/force/613/422

Αρχείο PDF iconISOTEC Flame Boots User Instructions.pdf
https://www.workmasterboots.com/download_file/force/68/422

121,07 € 121.07000000000001 EUR 121,07 €

14155,15 Lek


  • Χρώμα
  • Footwear size

Αυτός ο συνδυασμός δεν υπάρχει.

Add to Cart Buy Now

RESPIREX
RESPIREX

Respirex™ International are a leading supplier of personal protective solutions, specialising in the design and manufacture of high-performance chemical, particulate and respiratory protective clothing and protective footwear. Including our industry leading chemical protective footwear and our world class dielectric boots and overboots..


EN 20345 - S5
Closed heel, Cleated sole, Toe Cap (Shock resistant to 200J), (P) Penetration Resistant Midsole (≥ 1100 N), (E) Heel Energy absorption (≥ 20 Joule), (FO) resistance to hydrocarbons, (A) Anti-Static (between 1x10 5 Ω and 1x10 9 Ω), (WR) Waterproof
Details
EN 20345 SRC - Slip Resistant
Slip Resistance Outsole Tested on ceramic tile with sodium lauryl sulphate (a diluted soap solution) & Tested on steel with glycerol
Details
EN 20345 CI - Insulation against cold
For resistance against cold, EN ISO 20345 footwear is tested for 30 minutes at 1-20°C
Details
EN 20345 HRO - Heat resistant outsole
Heat-resistant footwear features an outsole which must be able to resist 300°C for 60 seconds. can be used in close proximity to hot surfaces such as freshly laid tarmac.
Details
EN 13832-3
This is the European safety standard for chemical protective footwear and is divided into three parts. Part 1 deals with terminology and test methods, Part 2 with requirements for limited contact with chemicals and Part 3 with requirements for prolonged contact with chemicals. For certification to EN 13832 Part 3, boots are tested for chemical degradation over a period of 23 hours against a minimum of three chemicals from a list of 15 designated challenge chemicals contained in Part 1. Part 2 is only intended for limited contact with chemicals and is not recommended for people working with, or in proximity to, dangerous or aggressive chemicals.
Details
EN 15090:2012
Footwear for firefighters. Three types of footwear for use by firefighters for general purpose rescue (F1), fire rescue (F2), hazardous materials emergencies (F3). Type 1 (F1): Forestry fire intervention: Toe cap & Perforation resistant plate (P) is optional, Can be class I and Class II (rubber or polymers). Chemical resistance is optional, can comply only if the boot is class II (polymeric materials) Heat resistance at least HI1. Type 2 (F2): Structural fire intervention: Toe cap protection & Perforation resistant plate. Can be class I and Class II. Chemical resistance is optional, can comply only if the boot is class II (polymeric materials). Heat resistance at least HI2 Type 3 (F3): Structural fire intervention with chemical risk: Toe cap protection & Perforation resistant plate. Chemical resistance Can be only Class II (polymeric materials). Heat resistance at least HI2. The fire intervention safety boots can have optionally: CI (outsoles with Cold Insulation). M (Metatarsal protection only if toe cap protection is present). AN (Ankle Protection). CR (Cut Resistance).
Details

Best Value 
Fast Delivery
Quality Consistency

Share this product:
Footwear size 35 or 36 or 37 or 38 or 39 or 40 or 41 or 42 or 43 or 44 or 45 or 46 or 47 or 48 or 49 or 50
Χρώμα BKR Μαύρο
This is a preview of the recently viewed products by the user.
Once the user has seen at least one product this snippet will be visible.
Recently viewed Products