New!
Chemik AS Παντελόνι Antistatic Chemical
Technical description of the product:
» back belt with inner elastic tape
» fly fastened with zipper
» two side slip pockets with flaps
» reflective tapes
» triple inner and crotch seam
Composition: 64% Poliester/34% Cotton/2% Carbon fibre 245 + 5 g/m2
Color: Light gray
Norm:
EN 1149-5:2018
EN 13034:2005+A1:2009 Typ PB[6]
EN 17353:2020 Typ B2
EN 1149 Anti-Static (ATEX)
This standard specifies PPE Clothing used in explosive environments (i.e. ATEX) where there is a risk that the garments could create sparks (source of ignition), which in turn could ignite explosive materials. Anti-Static garments marked EN 1149-5 are intended to be worn in Atex zones 1, 2, 20, 21 and 22. In oxygen enriched atmospheres or in zone 0, the Anti-Static garments should not be used without first being approved by a qualified Safety Engineer, as wear and tear can affect the protection of the garment and it is crucial that they are worn the correct way in these environments.Details
EN 13034 Liquid Chemicals
Standard for protection of a potential exposure to a light spray, liquid aerosols or low pressure, low volume splashes when complete liquid permeation barrier (at a molecular level) is not required. The following chemical groups/chemicals can be tested: H2SO4 30% (Sulphuric acid), NaOH 10% (Sodium hydroxide also called lye and caustic soda), O-xylene, Butanol. The result is given in scale 1-3 where the maximum value is 3. To pass the test and be able to use the EN 13034 symbol in the CE-marking, at least one chemical shall obtain level 3 for liquid repellency and at least one chemical shall obtain level 2 for resistance to penetration.Details
Best Value
Fast Delivery
Quality Consistency
Share this product:
| Χρώμα | GRR Γκρι |
This is a preview of the recently viewed products by the user.
Once the user has seen at least one product this snippet will be visible.
Once the user has seen at least one product this snippet will be visible.