B01736 Dielectric HV3 Maxi Overboot I SRC, Class 3
An electrically insulating dielectric overboot approved to current European standards. The HV3 dielectric boot provides protection of up to 30kV (Class 3) over the complete boot for over three minutes.
Ingenious rear entry design ensures the boot is quick and easy to fit and remove
Ideal for personnel who have to continually enter and exit hazardous areas
Single piece injection moulded construction with integral moulded fastener ensures there are no seams or mounting/fastener holes to leak
No metal fasteners or components used in the construction, removing the potential for chemical corrosion
Injection moulded using our proprietary HV3 compound for a seamless boot with superior electrical insulation properties
Lightweight for increased wearer comfort
Environmentally friendly PVC and Halogen free construction
Biodegradeable & Phalate free
Superb low temperature flexibility down to -40°C
CE marked with date and year of manufacture
Machine washable at up to 40°C
Five year shelf life
EN ISO 20347:2012 - I SRC
ELECTRICALLY INSULATING FOOTWEAR
EN 50321-1:2018 Class 3 AC
Conforms to ASTM F1117
Dielectric HV3 Maxi Overboots Sales Sheet.pdf
Dielectirc HV3 Maxi Overboot User Instructions.pdf
Respirex™ International are a leading supplier of personal protective solutions, specialising in the design and manufacture of high-performance chemical, particulate and respiratory protective clothing and protective footwear. Including our industry leading chemical protective footwear and our world class dielectric boots and overboots..
EN 20345 SRC - Slip ResistantSlip Resistance Outsole Tested on ceramic tile with sodium lauryl sulphate (a diluted soap solution) & Tested on steel with glycerol
EN 20345 I - Insulation against electricityELECTRIC SHOCK RESISTANT sole - CSA Z195-14 standard Method-Tested at 18000 V in dry conditions; max voltage 1.0 mA. Secondary protective equipment to be added to primary protective equipment. Not to be used in places with explosives or gas.
EN 20347 - OBBasic requirements (no toecaps)
EN 13832-3This is the European safety standard for chemical protective footwear and is divided into three parts. Part 1 deals with terminology and test methods, Part 2 with requirements for limited contact with chemicals and Part 3 with requirements for prolonged contact with chemicals. For certification to EN 13832 Part 3, boots are tested for chemical degradation over a period of 23 hours against a minimum of three chemicals from a list of 15 designated challenge chemicals contained in Part 1. Part 2 is only intended for limited contact with chemicals and is not recommended for people working with, or in proximity to, dangerous or aggressive chemicals.
EN 50321:2018EN 50321:2018 Electrical Insulated Footwear. Class 00 = provide protection up to a maximum working voltage of 500V, used at this class for wiring and other electrical maintenance. CLASS 0 = protect workers in areas where electrical stunning equipment is used, such as abattoirs, boots with electrical protection to EN 50321-1:2018 Class 0 are required. Dielectric class 0 safety boots are suitable for areas with a maximum working voltage of 1kV. Class 1 = suitable for areas with a maximum working voltage of 7.5kV and are available also as overboots ideal for personnel who have to continually enter and exit high voltage areas. CLASS 2 = protect from risk of electric shock from high voltages suitable for utility workers, electricians and telecom live working up to voltages of 17.5kV. CLASS 3 = provides protection to a maximum working voltage suitable for use in evironments with a maximum working voltage of 26.5kV. CLASS 4 = provide protection up to a maximum working voltage of 36000V. This gives the highest certified level of electrical protection available. At time of writing there are currently no Class 4 dielectric boots available in the market.
ASTM F1117Dielectric Footwear. Specification for Dielectric Footwear. Covers acceptance testing of dielectric overfoot and overshoe footwear designed to provide additional isolation or insulation of workers if in accidental contact with energized electrical conductors, apparatus, or circuits.
Share this product:
|Color||BLU Blue or LGR Lime Green|
|Footwear size||Medium 39-42 or Large 43-45 or XLarge 46-49|
Once the user has seen at least one product this snippet will be visible.