13-4 Puncture Hydraulic
HYDRAULIC OIL JET RESISTANT - HIGH CUT
Tested against hydraulic jets from a pinhole of 0,3mm, standard clean hydraulic oil at room temp,
250 bar pressure, 1 second exposure time, pinhole direct contact to glove and a contact force of ~3N.
The penetrating power of a hydraulic jet will vary considerably depending on hydraulic oil properties,
distance from pinhole, diameter of hole, working pressure and exposure time.
Main materials: HPPE, Polyester, Nitrile composite
Standard: EN388 4X44E, EN388 CUT E, ANSI CUT A5
Cut resistant: A5, E
Attributes: Oily environment, Wet environment
Coating: Nitrile 2
Available Sizes 7-12
Y.Berger & Co is a family owned textile company based in Sweden. The company was founded in 1959 and is active in the fields of technical textiles, safety gloves and interior textile. Today, our headquarters and warehouse is located in Gothenburg, Sweden. Eureka’s focus is on high performance gloves for demanding work situations, primarily in the industrial sector. Y.Berger has almost 60 years of experience in technical fibres, and this knowledge is the basis from which we produce advanced textile solutions tailored to meet the most demanding situations. Our excellent know-how and materials knowledge allow our laboratory and production facility to implement new technologies much faster and at a higher degree of sophistication compared to competitors.
ASTM F2878Needlestick Resistant Gloves. The ASTM F2878 test, introduced in 2016, uses a 21-gauge, 25-gauge, or 28-gauge needle to measure the amount of force needed to break through a sample of fabric. To achieve the highest rating of 5, a needlestick glove needs to exhibit at least 10 newtons of resistance.
Share this product:
|S/7 or M/8 or L/9 or XL/10 or XXL/11 or XXXL/12
Once the user has seen at least one product this snippet will be visible.